MZ-N10
3-1. Bottom Panel Section, Jog Dial Section
Notes: On installation, adjust the position of both switch (S802) and knob (hold).
@@ @Adjust the position of both switch (S951) and knob (batt).
@@ @Adjust the position of both the convex part of an open lever and knob (open).
S951
S802
The convex part of an open lever
5
6bottom panel assy
1 screw (M1.4)
3two screws (M1.4)
knob (HOLD) | 7 flexible board (CN891) |
4
knob (OPEN)
8 jog dial assy
knob (BATT)
2 screw (M1.4)
3-2. Upper Panel Section
1 flexible board (CN871)
3two screws (M1.4)
5 upper panel assy
4 two screws
(M1.4)
2Slide the open lever in the direction of the arrow, and open the upper panel section.
7