Sony MZ-N10 service manual 881 ###S, 882 ###S, Configuration of overall adjustment mode

MZ-N10

Adjustment required before Overall Adjustment	Overall Adjustment Mode
Note : Modify five adjusted values through the following proce-	• Configuration of overall adjustment mode
dure before performing the CD overall adjustment and MO
overall adjustment.

• Adjusted values modifying procedure				Overall adjustment mode	x key
				(Title display)
1. Select manual mode of the test mode, and set item number
				"Assy**"
	822 (see page 12).
					Continuing overall adjustment
	Remote commander LCD display
	822 ###S		**	. key
	**: Adjusted value					CD overall
						adjusting
2. Adjust with the [VOL +] key (adjusted value up) or [VOL --]				> key
	key (adjusted value down) so that the adjusted value becomes					MO overall
	03.			N key or		adjusting
3.	Press the	X key to write the adjusted value.				Automatic
4.	Select manual mode of the test mode, and set item number			u key
	870 (see page 12).			on the remote commander		Disc
						discrimination
5.	Press the	> key to set item number 875.
						overall
	Remote commander LCD display			Jog dial (down) or		adjustment
	875 ###S		**	[DISPLAY] key		Electrical
				on the remote commander
						offset
	**: Adjusted value
						adjustment
6. Adjust with the [VOL +] key (adjusted value up) or [VOL --]				Jog dial (up) or
	key (adjusted value down) so that the adjusted value becomes					Temperature
				[P MODE] key
	3E.					correction
				on the remote commander
7.	Press the	X key to write the adjusted value.				and
8.	Press the	> key to set item number 876.				Power supply
						adjustment
				[GROUP] key or
	Remote commander LCD display					auto item feed
				key
	876 ###S		**
				on the remote commander		NV reset
	**: Adjusted value					(item number 21)

9.Adjust with the [VOL +] key (adjusted value up) or [VOL --]key (adjusted value down) so that the adjusted value becomes 00.

10.Press the X key to write the adjusted value.

11.Press the > key to set item number 881.

Remote commander LCD display

881 ###S **

**: Adjusted value

12.Adjust with the [VOL +] key (adjusted value up) or [VOL --]key (adjusted value down) so that the adjusted value becomes 37.

13.Press the X key to write the adjusted value.

14.Press the > key to set item number 882 .

Remote commander LCD display

882 ###S **

**: Adjusted value

15.Adjust with the [VOL +] key (adjusted value up) or [VOL --]key (adjusted value down) so that the adjusted value becomes E0.

16.Press the X key to write the adjusted value.

24