Siemens SL45 manual 76Troubleshooting, Possible corrective measures

76Troubleshooting

Problem			Possible causes	Possible corrective measures
Voice mail does not			Call diversion not set	Set call diversion
work.				(see page 54).
Message “		“.	Message store full	Delete a message to make room
	h			(see p. 43).
Message cannot be			Service Providers do not support this	Check with your Service Provider.
sent.			service.
			Phone number of the Service Centre is	Set Service Centre (see page 44).
			not set or is set wrongly.
			SIM card contract does not support this	Contact your Service Provider.
			service.
			Service Provider overloaded	Repeat message.
			Addressee does not have	Check.
			a compatible phone.
Function cannot be			Not supported by Service Provider or re-	Contact your Service Provider.
set.			gistration required.
Charge counter does			Charge pulse not transmitted.	Contact your Service Provider.
not work.
PIN error			Three wrong entries	Enter the MASTER PIN (PUK) provided with
				the SIM according to the instructions. If
				MASTER PIN or PIN has been lost, contact
				your Service Provider.
Phone code error			Three wrong entries	Contact Siemens Service (see page 72).
Service Provider code			No authorization for this service.	Contact your Service Provider.
error
Too few/too many			Functions may have been added or re-	Check with your Service Provider.
menu entries			moved by your Service Provider via the
			SIM card.
No fax possible			Incorrect settings in the PC.	Check settings, see p. 68.
			No authorization for this service.	Contact your Service Provider.
			WrongWindows infra-red driver.	Replace Windows infra-red driver/contact
				your PC supplier.
Damage
Severe shock			Remove battery and SIM and insert them again. Do not dismantle the phone.

Phone exposed to moi- Remove and dry battery and SIM card. Dry immediately with cloth; do not heat. Dry

stureconnector contacts thoroughly. Stand unit upright in an air current. Do not dismantle the phone.