Toshiba DK 280 manual CO Line

Automatic line Selection:

1.[DN]

i

r-

2.CO Line

USING

3.Dial Access Code

/,,,,,I

Alphanumeric Messages:

[iTF%RT-]

El_

Busy Field:

When you receive an automatic callback for a CO Line, the seized line’s number

If your station automatically accesses a [PDN] when you go off-hook, the three character designation, “[NT” (Internal Dial Tone), displays to confirm this status.

If your station automatically accesses a CO line when you go off-hook, the number of the seized CO line is displayed.

When you access a CO line by dialing a CO line group access code, the accessed CO line number is displayed.

Messages up to 32 characters can be used in alphanumeric messaging. Messages can either be programmed or set as one-time messages. (Messages can also be used with a timed reminder.)

I:::0::::::;:::]

/<wa

The Busy Field (BLF) display indicates, in groups of IO, the last two digits of the station Primary Directory Numbers that are busy on any type of [DN] ([PDN],

[SDN], or [PhDN]) or set for Do Not Disturb (DND). Also, if a telephone’s [PDNs] are busy because they are in use on other telephones, the telephone will show busy on the BLF, even though it may be idle. The top display indicates that stations 200, 205, and 217 are either in use or in DND mode; the bottom display indicates the same for stations 217, 222, 224, and 229.

If Page is pressed, the 200/210 group will change to 21 O/220, and the busy/DND states of that group of stations will be displayed. The station groups will increment each time Page is pressed, thereby eventually displaying all stations.

8