Toshiba DK 280 manual CO Line Internal DN

J

Date/Time:

Dialed Number:

1.CO Line

2.Internal [DN]

Dialed Number

identification Service (DNIS) Calls:

:

1.Press Page to display date/time when talking on a Central Office (CO) line (Soft Keys must be off before the call is started).

2.The date/time is adjusted on a system-wide basis by the station located in port 00 (usually station 200).

3.Continued pressing of Page toggles the display in succession among: Date/Time, Number Dialed, and Elapsed Time of the present call.

The digits are displayed as you dial when connected to either a CO Line or the [DN] using:

n Manual dialing

n Automatic dialing

H Repeat Last Number Dialed

nSaved Number Redial Note:

If you are calling on a CO line, the display automatically changes from dialed number to elapsed time after a programmed period.

Incoming DNIS telephone numbers can be correlated in the system database with assigned DNIS names. These names can have up to 16 alphanumeric characters, and will display on your telephone’s LCD. This allows incoming calls to be instantly identified and appropriately answered.

Note:

DNIS information cannot co-exist on the same telephone LCD with Automatic Number Identification (ANI) information. (See ANI.) When an ANUDNIS incoming call is ringing, press the Page button to alternate between ANI and DNIS displays when both types of information is received on an incoming call.

To activate the DNIS display mode, press Mode + 6 1.

To deactivate the DNIS display mode, press Mode + 6 0.

For ACD calls.

12