Toshiba DK 280 manual Press a DN + #620 Press Spkr. During clear After clear

3.Press Spkr.

To Clear Name/Number Display:

1.Press a [DN] + #620.

2.Press Spkr. During clear:

After clear:

To Erase Name/Number Information:

1.Press a [DN] + #621.

2.Press 1 in the alpha mode to enter blanks.

3.Press Spkr.

:I

The new information is stored and will appear on the top line of the display. For example, if you entered “TOSHIBA EXT. 200”, that will appear above the date/day/time on the display.

You will hear a confirmation tone, then a busy tone.

Notes:

1.When user name is set, your title will appear on the LCD during direct, forwarded, and hunted calls. On override or OCA calls, the LCD will not display the title.

2.After a name is cleared, it may be redisplayed at any time by pressing a [DN] + # 6 2 1.

3.A name is displaced by message and call forward settings if they are set.

Current information will appear on the lower line of the LCD.

To erase	name/number	information	from	memory, enter blanks at the ‘User
Name” prompt. Refer to “Recording a Message” earlier in this chapter for more
information.					;,:
					!)
The erased	name/number	information	should	be gone.	/

44