Toshiba DK 280 manual Station-to-Station Message Waiting

2.Press Scroll to view the saved information on the LCD display.

n Press # to delete information on the LCD display.

n Press * to go back to previous LCD screen.

3.Press Lost Call

Auto Dial.

To Use Station-to-Station

Message Waiting:

1.Lift the handset or press a [DN] to receive internal dial tone.

2.Dial the desired station number.

3.The calling station user presses the Msg (or 7) to set the Msg LED on _ the called station.

If your telephone is equipped with a Lost Call Auto Dial button, you may auto dial a saved number by performing any of the following:

HEnter Class/AN1 Information display Mode + 6 2, and choose the number or name of the lost caller you want to contact.

H Press Pooled Line Crp*, and then Lost Call Auto Dial.

HPress a [DN] button, enter the appropriate CO or LCR access code>, then press Lost Call Auto Dial.

nPress the CO Line button”, and press Lost Call Auto Dial. Note:

1.The ANI/Caller ID received telephone numbers always include area codes on local calls as well as long distance calls. The DK280 system will always auto dial the digit “1” before the saved, outgoing telephone number.

2.If your telephone requires an account code be entered before dialing outside telephone numbers, enter the account code after access LCR or a CO line, then press the Lost Call Auto Dial button.

Station-to-Station Message Waiting

If there is no answer (or if the telephone is busy or DND), press the Msg button (or 7). This causes the Msg LED on the called station to flash. The called station’s LCD displays the calling station’s number. When the returned call is answered, the flashing Msg LED will turn off

The [DNs] after SENT are the [DNs] which received your message waiting indication signal, if you set a message waiting indication signal.

26