Power Save Mode
When the phone is in an area without service for about 15 minutes, it stops searching for service and enters into the Power Save Mode. When your phone activates this feature, Power Save is displayed on your screen. The phone automatically checks for service periodically or you can check manually by pressing any key.
Making a Call
Every time you make a call, follow these steps:
1)Make sure that the phone is turned on. If not, hold
down for 2 seconds.
2)Type the phone number and then press .
•If the phone is locked, type the lock code (see page 60).
3)To end the call press .
Correcting Dial Errors
If you typed a wrong number, press the Key once to delete the lastly typed digit, or Hold down the Key for 2 seconds to delete all the typed digits at the same time.
Receiving Calls
1)When the phone rings or vibrate (if the Vibrate Mode
is enabled), press any key (except ) to answer.
•When you press once, when a call is received, the phone stops ringing or vibrating depending on the
mode it is in. Press twice to disconnect.
2)To end an answered call press .
Adjusting the Volume
There are three types of volume in your phone: Ringer Volume, Key Volume and Speaker Volume. To adjust them do as follows :
Ringer Volume
1)Press Soft Key 1 Menu.
2)Press two times.
3)Press Soft Key 1 Select.
4)Press Ringer Volume.
5)Adjust the volume of the ringer with .
6)Then press Soft Key 1 Ok to save the ringer volume.
18 | 19 |