Key Volume
1)Press Soft Key 1 Menu.
2)Press 
two times.
3)Press Soft Key 1 Select.
4)Press 
Key Volume.
5)Adjust the key volume with 
.
6)Then press Soft Key 1 Ok to save the key volume.
Speaker Volume
1)Press Soft Key 1 Menu.
2)Press 
two times.
3)Press Soft Key 1 Select.
4)Press 
Speaker Volume.
5)Adjust the speaker volume with 
.
6)Then press Soft Key 1 Ok to save the speaker volume.
Quick Adjust
Adjusting Vibrate Mode
Use Vibrate Mode in a public place.
1)In standby mode, activate Vibrate Mode quickly by
pressing the 
. (for 2 seconds) instead of using the
Menu function.
•When Vibrate Mode is set,
•When Vibrate Mode is set, Key tone does not sound and Vibration is selected as the ringer.
Note To cancel Vibrate Mode, press 
again until Normal Mode Entered! is displayed.
Adjusting Lock Function
Used to prevent other persons from using your phone without your permission.
There are two types to enable the Lock Function with one key and by using the Menu (see page 60).
1)In standby mode, to activate the lock mode quickly,
press the 
(for 2 seconds).
Note To cancel the Lock Mode, Press Soft Key 1 Unlock, then enter your password (4 digits).
The Lock Code / Password has been set to 0000 by default.
Keypad Lock
This function allows you to carry the phone safely with- out accidentally dialing a number.
When this function is enabled, no call can be made and the access to the Menu will be locked. While the keypad is locked, it is possible to answer a call normally.
To enable the function :
1) Press the key 
for two seconds.
To disable the function :
1) Repeat the procedure.
20 | 21 |