Ericsson LBI-38965B installation manual Cpu

Page 10

LBI-38965

PHYSICAL DESCRIPTION AND COMPATIBILITY

The BCU/CAL is based on a VMEbus computing platform with the following components:

CPU

Technico TVME 147 single-board computer based on a 68030 microprocessor

∙Supports BCU/CAL application processing

∙Interfaces to hard disk, floppy disk, and tape drive via an on-board small computer systems interface (SCSI) with a connector on the transition module

∙Interfaces to the console terminal via an RS-232 serial port with a connector on the transition module

∙Network physical connection is 802.3 Ethernet, 10 BASE-15 (Thick Wire). A MAU may be used for connection to a Thin Wire (coaxial) network

Internal Drives

Hard Disk: 3½" 1.2 GB

∙Provides configuration parameter storage

∙Provides call detail record (CDR) storage

∙Provides raw activity record (RAR) buffering/storage

Floppy Disk: 3½" 1.44 MB

∙Used for application program updates Tape: 3½" 4/8 GB 4mm DAT

∙Provides call detail record (CDR) file archival storage

∙Provides general purpose file interchange with UNIX

∙UNIX Tar format, 512-byte tape block size, no data compression Communications Module

Formation WANServer fv5310

∙Interfaces the BCU/CAL via high-speed high-level data link control (HDLC) link to the Central Activity Module (CAM) in the Integrated Multisite and Console Controller (IMC)

System Manager Interface (CAL only)

One or Two Emulex Performance Series P2516-SLTL Terminal Servers

∙Communicates with the BCU/CAL over the network and with the System Manager over RS-232

∙Converts between Transmission Control Protocol (TCP) sockets and asynchronous serial protocol

10

Image 10

Contents Ericssonz LBI-38965 Table of Contents Table of Contents Introduction BCU/CAL ArchitectureCAL Functional Description BCU Functional DescriptionCall Types Supported Introduction Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityCommon BCU and CAL Operational Specifications SpecificationsBCU Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewConversations Group Billing ModeRF Channel Usage Air Time Grouping CallsContents File NameDatabase Elements Default DataOperator Functions Unit DataCDR Processing CDR Processing ErrorsCall Processing Call Processing CDR OutputSystem Manager Interface CAL Operational SpecificationsProtocol Supported Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Distribution MediaInstallation Diskette UsageIP.DAT File Parameters ROUTES.DAT Configuration FileParameter MeaningEXPORTS.DAT Configuration File Directory clientip EXPORTS.DAT File ParametersCAL.DAT Configuration File CAL.DAT File ParametersInitial Installation PrerequisitesInstallation Installation User Information Password Default System AccountsLogin Access LevelPrerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting Proper System Shutdown Software UpgradesUser Information Invoke the BCS program CAL Terminal Server Configuration # accessConfiguration Tips ExampleThis page intentionally left blank Appendix a Edacs Billing CDR Format Billing for Multiple Sites OverviewBilling by Conversation Record EncodingMULTIPLE-SITE Calls Record LayoutSINGLE-SITE Calls CDR Radix-64 DigitMOBILE-TO-LAND Telephone Interconnect Calls Table A.1 Call Detail Record Field DescriptionsTable A.2 Call Types Call Type DefinitionsCall Type Hex Decimal DescriptionDescription Valid with Rec. Type A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Page Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Table B.1 WANServer Port Connector DB-25F Signal NameCable Pinouts FunctionTable B.2 WANServer Port Table B.3 WANServer Port Table B.4 WANServer Port Table B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector M/W BCU/CAL Port Signal NameFigure B.9 CAL Terminal Server to Distribution Panel Cable Figure B.10 CAL 32-Port Configuration Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation