Ericsson LBI-38965B Physical Description and Compatibility, Physical Specifications

Page 8

LBI-38965

PHYSICAL DESCRIPTION AND COMPATIBILITY

2. PHYSICAL DESCRIPTION AND COMPATIBILITY

This section outlines the specifications, depicts the physical architecture, and provides compatibility information for the BCU/CAL.

Software for the BCU and the CAL are merged into one software package. Feature encryption allows or disallows BCU or CAL functionality. The two products can also run on the same hardware platform with minor additions for CAL.

2.1. PHYSICAL SPECIFICATIONS

General Specifications

BCU/CAL:

ELMA VME System 12 7-slot enclosure with PSU and integral cooling fan

TVME 147 single-board computer with TVME 712/M Transition Module

Formation WANServer fv5310

Maxtor MXT-1240S 1.2 GB 3½" half-height 8.5ms hard disk drive, internal

Teac FD235HS-711 1.44 MB 3½" half-height floppy disk drive, internal

Tape Drive (Optional with BCU only):

Archive/Maynard 4324NP 4/8 GB 3½" half-height 4mm digital audio tape (DAT) drive, internal

Console Terminal:

DEC VT100 or compatible console terminal

Terminal Servers (CAL only)

Emulex Performance Series P2516-SLTL (16 ports per terminal server)

Power Supply

BCU/CAL:

115/230 VAC, 47-63 Hz, 500 W

Physical (EGE Standard Cabinet)

BCU/CAL:

6 rack units: 26.67 cm (10.5 in.) high x 48.26 cm (19 in.) wide x 49.99 cm (19.68 in.) deep

Environmental
Storage Temperature:	-40 to +85°C
Operating Temperature: 0 to 40°C (ambient)
Operating Altitude:	< 15,000 feet
Shipping Altitude:	< 50,000 feet
Relative Humidity:	< 90% (non-condensing)

8

Image 8

Contents Ericssonz LBI-38965 Table of Contents Table of Contents Introduction BCU/CAL ArchitectureCall Types Supported BCU Functional DescriptionCAL Functional Description Introduction Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityBCU Operational Specifications SpecificationsCommon BCU and CAL Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewGroup Billing Mode RF Channel Usage Air TimeConversations Grouping CallsContents File NameDefault Data Operator FunctionsDatabase Elements Unit DataCDR Processing Errors Call ProcessingCDR Processing Call Processing CDR OutputProtocol Supported CAL Operational SpecificationsSystem Manager Interface Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Distribution MediaInstallation Diskette UsageROUTES.DAT Configuration File ParameterIP.DAT File Parameters MeaningEXPORTS.DAT Configuration File Directory clientip EXPORTS.DAT File ParametersCAL.DAT Configuration File CAL.DAT File ParametersInitial Installation PrerequisitesInstallation Installation User Information Default System Accounts LoginPassword Access LevelPrerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting User Information Invoke the BCS program Software UpgradesProper System Shutdown CAL Terminal Server Configuration # accessConfiguration Tips ExampleThis page intentionally left blank Appendix a Edacs Billing CDR Format Overview Billing by ConversationBilling for Multiple Sites Record EncodingRecord Layout SINGLE-SITE CallsMULTIPLE-SITE Calls CDR Radix-64 DigitMOBILE-TO-LAND Telephone Interconnect Calls Table A.1 Call Detail Record Field DescriptionsCall Type Definitions Call Type Hex DecimalTable A.2 Call Types DescriptionDescription Valid with Rec. Type A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Page Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Connector DB-25F Signal Name Cable PinoutsTable B.1 WANServer Port FunctionTable B.2 WANServer Port Table B.3 WANServer Port Table B.4 WANServer Port Table B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector M/W BCU/CAL Port Signal NameFigure B.9 CAL Terminal Server to Distribution Panel Cable Figure B.10 CAL 32-Port Configuration Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation