Ericsson LBI-38965B installation manual Installation Diskette, Usage

Page 22

LBI-38965

INSTALLATION

The table below summarizes the contents of the distribution disks.

Installation

Diskette

Table 1 - BCU/CAL Installation Diskettes

Contents

1

2

3

4

LOADER.SX - “Bootstrap” loader for the BCU/CAL application.

BC_A.SX - First segment of the BCU/CAL executable image.

BC_B.SX - Second segment of the BCU/CAL executable image.

Product configuration files to be modified by the BCU/CAL end user.

The following table summarizes the configuration files contained on Installation Diskette 4. These files are provided in template form, and should be modified to suit customer-specific requirements. The files are in MS-DOS format, and may be edited with any ASCII text editor.

File Name

IP.DAT

ROUTES.DAT

EXPORTS.DAT

CAL.DAT

Table 2 - BCU/CAL Configuration Diskette

Usage

Defines the IP address, subnet mask, and host name of the BCU/CAL.

Defines network routing paths between the BCU/CAL and other hosts on the customer’s network. Syntax is similar to the UNIX /etc/gateways file.

Defines the BCU/CAL NFS export list for units which have been purchased with the NFS file server software feature. File contents specify NFS client IP address(es) and the BCU/CAL directory(s) they are privileged to mount. Syntax is similar to the UNIX/etc/exports file.

Defines the site interfaces from CAL to the EDACS System Manager. Contents of this file are directly related to configuration parameters which must be set on the Emulex Terminal Server(s).

4.2.1.1. User Configuration Files

This section discusses the contents of the user configuration files contained on Installation Diskette 4. These files should be modified according to customer requirements. When changes are made to the file contents, the BCU/CAL should be rebooted with the diskette installed in the floppy drive.

4.2.1.1.1. IP.DAT Configuration File

The IP.DAT configuration file is provided in template form on Installation Diskette 4. This file is common to both the BCU and CAL feature licenses. It defines the unit's Internet parameters on the end user's local orwide area network. The following three lines show the default contents of the IP.DAT file. The values shown in bold print should be modified by the end user. Only “space” characters should be used between the parameter keywords and the end user assigned values. Any errors detected in the file will be displayed on the local console during system boot.

#######################################################################

#######################################################################

IP_ADDRESS 147.117.37.226

HOST_NAME bcu01

SUBNET_MASK FFFFF000

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Ericssonz LBI-38965 Table of Contents Table of Contents Introduction BCU/CAL ArchitectureCAL Functional Description BCU Functional DescriptionCall Types Supported Introduction Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityCommon BCU and CAL Operational Specifications SpecificationsBCU Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewConversations Group Billing ModeRF Channel Usage Air Time Grouping CallsContents File NameDatabase Elements Default DataOperator Functions Unit DataCDR Processing CDR Processing ErrorsCall Processing Call Processing CDR OutputSystem Manager Interface CAL Operational SpecificationsProtocol Supported Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Distribution MediaInstallation Diskette UsageIP.DAT File Parameters ROUTES.DAT Configuration FileParameter MeaningEXPORTS.DAT Configuration File Directory clientip EXPORTS.DAT File ParametersCAL.DAT Configuration File CAL.DAT File ParametersInitial Installation PrerequisitesInstallation Installation User Information Password Default System AccountsLogin Access LevelPrerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting Proper System Shutdown Software UpgradesUser Information Invoke the BCS program CAL Terminal Server Configuration # accessConfiguration Tips ExampleThis page intentionally left blank Appendix a Edacs Billing CDR Format Billing for Multiple Sites OverviewBilling by Conversation Record EncodingMULTIPLE-SITE Calls Record LayoutSINGLE-SITE Calls CDR Radix-64 DigitMOBILE-TO-LAND Telephone Interconnect Calls Table A.1 Call Detail Record Field DescriptionsTable A.2 Call Types Call Type DefinitionsCall Type Hex Decimal DescriptionDescription Valid with Rec. Type A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Page Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Table B.1 WANServer Port Connector DB-25F Signal NameCable Pinouts FunctionTable B.2 WANServer Port Table B.3 WANServer Port Table B.4 WANServer Port Table B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector M/W BCU/CAL Port Signal NameFigure B.9 CAL Terminal Server to Distribution Panel Cable Figure B.10 CAL 32-Port Configuration Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation
Top Page Image Contents