Ericsson LBI-38965B installation manual System Disk Booting

Page 32

LBI-38965

INSTALLATION

USER ACTION: If either of the previous commands were executed, you can verify them by entering the following command. The previous two steps may be repeated in case the values were incorrectly entered by the operator.

BCS> show system /nim /pim

NIM slot = 32

PIM slot = 16

USER ACTION: Exit BCS, which returns the operator the pSH+> prompt.

BCS> exit

pSH+>

4.2.2.2. System Disk Booting

After software has been installed on the BCU/CAL system disk, the BCU/CAL will use these files for any subsequent (re)boot. The following example shows the typical console output observed when the BCU/CAL boots from its hard disk. No user action is required for this process. The BCU/CAL will immediately begin normal application processing when the boot cycle is complete.

<OS> Beginning bootstrap loader: DATE: May 4, 1994 TIME: 1:56:23 pm

<OS> Scanning hard disk for LOADER.SX...

<OS> Loading file LOADER.SX from the hard disk... * <OS> Load complete. 97762 bytes loaded.

<OS> Hard disk has been unmounted.

<OS> Transferring program control to LOADER module...

<LOADER> Installing BCU/CAL: DATE: May 4, 1994 TIME: 1:56:58 pm

<LOADER> Processing file 01.02/cnfg/IP.DAT. Setting IP address: 147.117.37.226 (0x937525E2) Assigning host name: bcu01

Setting subnet mask: 0xFFFFF000

<LOADER> Loading file 01.02/loads/BC_A.SX from the hard disk... * <LOADER> First load complete. 393126 bytes loaded.

<LOADER> Loading file 01.02/loads/BC_B.SX from the hard disk... * <LOADER> Second load complete. 55692 bytes loaded.

<LOADER> Application load complete. 448818 bytes loaded. <LOADER> Hard disk has been unmounted.

<LOADER> Transferring program control to BCU/CAL...

<BCU/CAL> System startup: Wed May 4 13:58:32 1994 <BCU/CAL> Beginning boot of fv5310 WanServer board...

<BCU/CAL> WanServer boot complete.

<BCU/CAL> Initializing memory and global objects...

<BCU/CAL> Beginning application installation...

<BCU/CAL> Checking system directories. <BCU/CAL> Checking system configuration files. <BCU/CAL> Checking product feature license. <BCU/CAL> Application installation complete.

32

Image 32

Contents Ericssonz LBI-38965 Table of Contents Table of Contents Introduction BCU/CAL ArchitectureCall Types Supported BCU Functional DescriptionCAL Functional Description Introduction Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityBCU Operational Specifications SpecificationsCommon BCU and CAL Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewGroup Billing Mode RF Channel Usage Air TimeConversations Grouping CallsContents File NameDefault Data Operator FunctionsDatabase Elements Unit DataCDR Processing Errors Call ProcessingCDR Processing Call Processing CDR OutputProtocol Supported CAL Operational SpecificationsSystem Manager Interface Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Distribution MediaInstallation Diskette UsageROUTES.DAT Configuration File ParameterIP.DAT File Parameters MeaningEXPORTS.DAT Configuration File Directory clientip EXPORTS.DAT File ParametersCAL.DAT Configuration File CAL.DAT File ParametersInitial Installation PrerequisitesInstallation Installation User Information Default System Accounts LoginPassword Access LevelPrerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting User Information Invoke the BCS program Software UpgradesProper System Shutdown CAL Terminal Server Configuration # accessConfiguration Tips ExampleThis page intentionally left blank Appendix a Edacs Billing CDR Format Overview Billing by ConversationBilling for Multiple Sites Record EncodingRecord Layout SINGLE-SITE CallsMULTIPLE-SITE Calls CDR Radix-64 DigitMOBILE-TO-LAND Telephone Interconnect Calls Table A.1 Call Detail Record Field DescriptionsCall Type Definitions Call Type Hex DecimalTable A.2 Call Types DescriptionDescription Valid with Rec. Type A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Page Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Connector DB-25F Signal Name Cable PinoutsTable B.1 WANServer Port FunctionTable B.2 WANServer Port Table B.3 WANServer Port Table B.4 WANServer Port Table B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector M/W BCU/CAL Port Signal NameFigure B.9 CAL Terminal Server to Distribution Panel Cable Figure B.10 CAL 32-Port Configuration Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation