VeriFone 8000 manual Installing and Removing a SIM/SAM Card

Page 16

SETUP

Installing SIM, SAM, and SD Cards

7Lower the SIM/SAM cardholder onto its base.

Check that the corner of the SIM/SAM card is not obstructed by the triangular protrusion at the corner of the cardholder base.

8Lock the SAM cardholder by sliding the cardholder locking clasp to the LOCK position.

CAUTION

Do not bend or scratch the contacts of the SAM cardholder when installing or removing cards.

9If necessary, replace the battery. See Figure 9.

10Replace the battery/card compartment cover. See Figure 5.

To remove a SIM/SAM card

To install an SD/MMC card

Figure 6 Installing and Removing a SIM/SAM Card

1Open the card holder, by following steps 1-4 of To install a SIM or a SAM card and remove the card.

2Close the card holder by following steps 7-8 of To install a SIM or a SAM card.

For further instructions, see Figure 6.

1Remove the battery/card compartment door. See Figure 4.

2If necessary, remove the battery. See Figure 10.

3Hold the SD/MMC card directly above the SD/MMC card slot, with the metal contacts facing down and the narrow edge with the beveled corner pointing towards the slot opening.

4Lower the SD/MMC card into position.

16	NURIT 8000 INSTALLATION GUIDE

Image 16

Contents Nurit Nurit 8000 Installation Guide VeriFone, Inc Contents Maintenance CleaningTroubleshooting Service and SupportGuide Conventions Audience Organization Related DocumentationDocument Conventions Acronym Definitions Acronym DefinitionsNurit 8000 Features Features at a GlanceOverview GSM Selecting SetupLocation Indoor Use Electrical ConsiderationsOutdoor Use To unpack Unpacking Shipping CartonShipping carton Examining Nurit Features Nurit 8000 Terminal Features Front Panel Terminal Front Panel Thermal printerOpening Closing Battery Card Compartment Cover To remove the battery /card compartment coverInstalling SIM To install a SIM or a SAM cardSAM, and SD CardsInstalling and Removing a SIM/SAM Card Inserting the SD/MMC Card Connecting the Battery BatteryTo insert the battery To remove the batteryBattery Maintenance Removing the BatteryBattery Charge Status Powering On Off the Terminal With a Battery PackBattery Charge LED Indicator Status Using the Printer Loading Paper intoPrinter To load paper intoRoll From Closing the Paper CompartmentRemoving the Paper To remove a rollPower Supply Connection To connect the car adapter Car Adapter ConnectionAdapter Connecting Cables To connect the data cableCable External Modem ConnectionTo connect To disconnectTo use the magnetic Using Magnetic Stripe Card ReaderStripe card reader Using the Smart Card Reader ReaderSpecifications SpecificationsEnvironmental Regulatory,Reference Ieee 1725, Section Cleaning the Nurit Maintenance and Cleaning8000 Cleaning the Nurit Troubleshooting Guidelines Wireless Communication Does Not Work Nurit 8000 Appears to Have No PowerTransactions Cannot be Completed Successfully Operation with PeripheralDevice Not SuccessfulKeypad Does Not Respond Service and Support Accessories Documentation Information Label on Unit BottomVeriFone Cleaning Cables AdaptersExternal Modem Kit DocumentationAccessories and Documentation Index Service Index Nurit