SETUP
Power Supply
Car Adapter
Connection
To connect the car adapter
The car adapter is an optional accessory. You can use the car adapter to provide power to the NURIT 8000 and to charge the installed
For information on ordering a car adapter for the NURIT 8000 terminal, see Accessories and Documentation.
Connect one end of the car adapter cable to the Power port on the back of the terminal and the other into the vehicle’s electrical power socket.
Figure 16 Car Adapter Power Supply Connection
NOTE
The LED indicator on the car adaptor indicates the charge status of the battery, as described in Battery Charge Status.
To remove the car | Unplug the car adapter from the vehicle’s electrical power socket and then from |
adapter | the power connector, at the front of the NURIT 8000 terminal. |
24 | NURIT 8000 INSTALLATION GUIDE |