Bushnell 1000 manual

Page 8

Regular Mode ( ): This mode does not provide any degree of elevation or compensated distance, but instead, line of sight distance only.

MENU SETUP – SELECTION of BOW, RIFLE, REGULAR MODES and UNIT OF MEASURE

There are two ARC (Angle Range Compensation) modes and one REGULAR mode. The two ARC modes are BOW mode and RIFLE mode.

To select between these modes, first turn the unit “ON” by pressing and releasing the POWER button. Next, press and hold the MODE button for five seconds. The “SETUP” display icon will light and the current compensation mode will be identified by either the “BOW” symbol ( ), the “RIFLE symbol

( ) lit with one of the ballistic groups (A thru J) displayed and flashing, or no indicators lit and the

message ( ) flashing in the bottom of the LCD.

The modes can be cycled through in a circular fashion by pressing and releasing the mode button. The order of modes is a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE J, REG, etc. When the bow selection is displayed, the “BOW” icon will flash and when a “RIFLE: selection is displayed, the “RIFLE” icon will be steady, but the ballistic group will be flashing

toward the bottom of the LCD. When the ( ) is displayed, the message ( ) will flash near the bottom of the LCD.

Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER button. Following this selection, the current unit of measure, “Y” for yards or “M” for meters will flash in the LCD and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure. When the desired unit of measure is displayed, press the POWER button to accept the unit of measure

and to return to the normal operating menu. Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identified in the LCD as indicated below.

SETUP menu

Normal Operating Menu

When the unit automatically powers down, operation will always return to the normal operation (i.e. away from SETUP) with the last used ARC mode active (i.e. BOW, RIFLE, or REGULAR) along with the last used TARGETING modes active (Standard SCAN, BULLSEYE, or BRUSH). If the unit turns off while in the SETUP menu, the unit will always return to the last mode(s) still active.

Once the range is displayed, continue to hold the POWER button down for approximately 2 seconds while holding the aiming circle on the object and keeping the unit as steady as possible so as to allow the inclinometer enough time to measure angle. Then release the POWER button. Once you have released the power button, a degree of angle and compensated range will be displayed beneath the line of sight distance as seen in the images below.

14

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Scout 1000 Scout Power Eyepiece Mode Tripod Mount HOW OUR Digital Technology Works Ranging AccuracyGetting Started Inserting the Battery Adjusting the EyepieceLiquid Crystal Display LCD Indicators Operational SummarySelective Targeting Modes Unit of Measure OptionsActive Laser Page Magnification and Coatings Tripod MountPage BOW Mode Example Rifle Mode ExampleRegular Mode Knowing Which Ballistic Group to SelectExample What if your caliber is not listed?Specifications CleaningIf unit does not turn on LCD does not illuminate If target range cannot be obtainedScout 1000 Scout MARCHE/ARRÊT alimentation Oculaire Mode Monture de trépied Comment Notre Technologie Fonctionne Précision EN DistanceComment Démarrer Mise EN Place DE LA Pile Réglage DE L’OCULAIREFonctionnement EN Bref Indicateurs DE L’AFFICHAGE À Cristaux Liquides LCDLaser Activé Mode DE Visée SélectiveOptions D’UNITÉ DE Mesure Page Grossissement et traitements Monture DE TrépiedNormal clignote au bas de l’écran Exemple DU Mode TIR À L’ARC Exemple DU Mode FusilMode Normal Savoir Quel Groupe Balistique SélectionnerExemple Et si le calibre n’est pas sur la liste ?Caractéristiques NettoyageSi l’appareil ne s’allume pas l’écran LCD ne s’active pas Si la distance de la cible ne peut pas être obtenueEspañol ON/OFF Encendido Ocular Modalidad Montura de trípode Cómo Funciona Nuestra Tecnología Digital Exactitud DE LA TelemetríaInstrucciones Iniciales Cómo Introducir LA Pila Cómo Ajustar EL OcularResumen Operacional Indicadores DE LA Pantalla DE Cristal Líquido LCDModalidades Selective Targeting Opciones DE Unidad DE MedidaLáser Activo Figura Aumentos y recubrimientos Adaptador DE Montaje EN TrípodeUnidad DE Medida Ejemplo DE Modalidad BOW Arco Ejemplo DE Modalidad RifleModalidad Regular Cómo Saber QUÉ Grupo Balístico SeleccionarEjemplo ¿Qué hacer si su calibre no aparece en la lista?Especificaciones LimpiezaSi la unidad no se enciende La pantalla LCD no se enciende Si no se puede obtener la distancia al blancoDeutsch AN/AUS Stromversorgung Ovular Modus Stativmontage Funktionsweise Unserer Digitaltechnologie Genauigkeit DER EntfernungsmessungZusammenfassung DER Funktionsweise LCD-ANZEIGEN Inbetriebnahme Einsetzen DER BatterieEinstellen DES Okulars Selektive Targeting Modi MESSEINHEITS-OPTIONENAktiver Laser Page Vergrößerung und Vergütung StativmontagePage Beispiel BOGEN-MODUS Beispiel GEWEHR-MODUSNormaler Modus DIE Wahl DER Richtigen Ballistischen GruppeBeispiel Ihr Kaliber ist nicht aufgeführt. Was nun?Technische Daten Reinigung101 Die Zielentfernung lässt sich nicht feststellen102 104 Descrizione Della Tecnologia Digitale Impiegata 105106 Indicatori SUL Display a Cristalli Liquidi LCD 108PER Iniziare Inserimento Della Pila Regolazione DELL’OCULARE110 Indicazione DELL’UNITÀ DI MisuraLaser Attivoi Modalità Selective Targeting112 113 114Ingrandimento e trattamento Sostegno PER Treppiede116 Acceso ed il messaggio lampeggerà sul display, in bassoEsempio DI Modo Arco 117Esempio DI Modo Fucile 118Come Selezionare IL Gruppo Balistico Appropriato 120121 122Pulizia 124Dati Tecnici Se non si riesce a misurare la distanza dal bersaglio 126Se l’unità non si accende il LED non si illumina 127 129 131 Como Funciona Nossa Tecnologia Digital133 Como Começar Inserção DA PilhaAjuste DA Ocular Resumo Operacional135 Opções DA Unidade DE MedidaLaser Ativo Modos Selective Targeting137 Figura138 139Ampliação e revestimentos Montagem EM TripéMenu de Configuração 141143 Exemplo do Modo ArcoExemplo do Modo Rifle Seleção do Grupo DE Balística Apropriado 145146 147Limpeza 149Especificações Se a leitura da distância do alvo não puder ser obtida 151Unidade não liga o LCD não acende
Related manuals
Manual 155 pages 4.5 Kb Manual 78 pages 62.67 Kb

1000 specifications

The Bushnell 1000 is a powerful laser rangefinder designed for outdoor enthusiasts, hunters, and sports enthusiasts. Renowned for its accuracy and durability, it excels in providing precise distances over long ranges. The device boasts a maximum range of up to 1000 yards, making it ideal for both short-range and long-distance applications.

One of the standout features of the Bushnell 1000 is its Advanced Digital Optical System (ADOS). This technology enhances the clarity and brightness of the viewed image, allowing users to see targets clearly, even in low-light conditions. Coupled with multi-coated optics, ADOS ensures minimal light loss and improved light transmission, providing a bright and clear view of distant objects.

The rangefinder also incorporates Bushnell's famous PinSeeker technology. This feature helps users easily identify and lock onto flagsticks or other targets, ensuring accurate readings even in cluttered environments. When enabled, PinSeeker can ignore background targets, allowing hunters and golfers alike to achieve the precise measurement they need without distractions.

Another significant selling point is the built-in scan mode. This function allows users to continuously measure distances while moving, providing real-time data as users pan across a landscape. This is particularly beneficial in dynamic environments where the target may shift or move unexpectedly.

In terms of design, the Bushnell 1000 is lightweight and ergonomic, making it easy to carry during long outings. It also features a rugged, waterproof construction that is essential for outdoor use, ensuring reliability in various weather conditions. Its compact size and streamline design make it a convenient tool to fit in any gear bag.

For those who prioritize battery life, the Bushnell 1000 offers an efficient power management system. The device usually runs on a standard 9V battery, providing extended usage time between replacements.

With its innovative technologies, user-friendly design, and commitment to durability, the Bushnell 1000 remains a top choice for anyone seeking a reliable and effective laser rangefinder. Whether for hunting, golfing, or any other outdoor activity, this device is equipped to meet the demands of serious enthusiasts.
Top Page Image Contents