HOW to Fold and Move the Treadmill

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If the incline Is not at the lowest position, the treadmill will be permanently damaged. Next, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) In order to false, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. Ceutlon: To avold pinching your hands, do not hold the treadmill in the locations Indicated by the arrows. To decrease the possibllity of Injury, bend your legs and keep your back straight. As you ralse the treadmill, make sure to llft with your legs rather than your back. Raisethe treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Raise the treadmill until the storage latch closes over the frame guide. Make sure that the storage latch closes fully over the frame guide.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85 ° Fahrenheit.

HOW TO REMOVE THE COVER PANEL

When the treadmill is in the storage position, the woodgrain- finish cover panel will be displayed. If desired, the cover panel can be removed to expose the black finish of the frame cover. To remove the cover panel, insert your fingers be- tween the lower end of the cover panel and the frame cover at the position indicated by the arrow. Pull the cover panel off the panel fasteners. Work your way up until the cover panel is removed.

Using a phillips head screwdriver, remove one of the panel screws and panel fasteners from the frame cover, Screw the panel screw back into the frame cover. Press the removed panel fastener onto one of the fasteners on the cover panel. Repeat this process,removing one panel fastener at a time, until all six panel fasteners are removed. Store the cover panel away from moisture and dust.

Do not hold here

Latch.1 Closed

Frame.___

Cover Panel

Frame C

Panel

Fastener

Cove, ane,\;ane,J-'///

,_,_ ,_ Fa:tener

Fastener