Sears 831.29776 user manual Attach the Pulse Sensor 114 to the Head6and 114 I

Page 7

4. Attach the Pulse Sensor (114) to the Head6and (115).

4

Sensor

114 I \

Clothes

Make sure that the sensor window is pres_sed through

 

 

 

 

the indicated hole in the Headband.

 

 

 

 

Press open the clothes clip, and insert the pulse sensor

 

 

 

 

wire into the clothes clip. Make sure that the pulse

 

 

 

 

sensor wire is resting against the hinge of the

 

 

 

 

clothes clip (see the Inset drawing). The use of the

 

 

_Clothes

Clip

pulse sensor is explained on page 8.

 

 

 

 

 

 

 

 

115

Pulse Sensor Wire"_

 

5. Remove the backing from the Adhesive Clip (90). Press the Clip onto the Rear Roller Cover (82) in the indicated location. Press the Allen Wrench (89) into the Clip.

Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. For Information on ordering a mat,

see REPLACEMENT PARTS on the back cover.

89

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model No Serial No PerformancetreadmillSEARS, Roebuck and CO., Hoffman ESTATES, IL Full 90 DAY Warranty Table of ContentsImportant Precautions Awarning Foot Rails Front Wheel Before YOU BeginThank you for selecting the Proform = 725 TL tread Water Bottle HolderRefer to HOW to Lower the Treadmill for USE AssemblyOn page 19. Follow the instructions to lower the treadmill Make sure that the sensor window is pressed through Attach the Pulse Sensor 114 to the Head6and 114 I \HOW to USE the Pulse Sensor Having an equipment-grounding conductor and a Operation AdjustmentHOW to Plug Power Cord Performant Lube TM Walking BeltIagramoftheconsole Features of the ConsoleAGE WeightHOW Touse Emanualmode UAL ControlSor must be worn see Pulse Sensor on Pulse dlsplay For this display to op Erate, the pulse sen8. After a few Seconds, the heart WeHr a MancePressed, Time display =r,s j USE the Pulse Ness TestMcoe FIT Ness TestCate your relative fit HOW to Select the Information ModeSpond while the Fitness Test program is selected Latch.1 Closed Frame Cover Panel Fastener HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Remove the Cover PanelHOW to Lower the Treadmill for USE HOW to Move the TreadmillStorage Closed Position Symptom the Power does not Turn onSymptom the Power Turns OFF During USE Symptom the Walking Belt Slows When Walked onSymptom the Walking Belt is OFF-CENTER When Walked on Symptom the Pulse Sensor does not Function ProperlySymptom the Treadmill Sits Unevenly on the Floor Exercise Intensity Conditioning GuidelinesWorkout Guidelines Correct form for several basic stretches is shown Suggested StretchesPage Remove this Exploded Drawing and Part List from the Manual 131 \115 100 Fastener NSPModel No SE /ARS
Top Page Image Contents