Stamina Products 55-2065 owner manual Hardware Identification Chart, Millimeters

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit, open the hardware bag and make sure that you have the following items:

	3/16"		1/4"	5/16"		3/8"		1/2"
											INCHES
0	1/2		1	1/2	2	1/2	3		1/2	4	1/2		5	1/2	6
															in.
0	10	20	30	40	50	60	70	80	90	100	110	120	130	140	mm.
															150
											MILLIMETERS
	6		8		10		12		Place washers, the end of bolts or screws on the
									circles to check for the correct size. Use the small
									scale to check the sizes of bolts and screws.

Part No. and Description		Qty
Length
63	Carriage Bolt (M8 x 1.25 x 85mm)	2
65	Bolt, Round Head (M6 x 1 x 25mm)	4
66	Bolt, Round Head (M6 x 1 x 35mm)	4
78	Screw, Round Head (M5 x 12mm)	2
68	Bolt, Socket Head (M8 x 1.25 x 35mm)	2
70	Bolt, Socket Head (M8 x 1.25 x 25mm)	4
71	Bolt, Socket Head (M8 x 1.25 x 50mm)	2
72	Bolt, Socket Head (M8 x 1.25 x 90mm)	2
83	Nylock Nut (M6 x 1)	4
85	Nylock Nut (M8 x 1.25 x 8mm thick)	8
86	Nylock Nut (M10 x 1.25)	2
88	Lock Washer (M8)	8
89	Washer (M8)	2
90	Washer (M10)	2

NOTE: Some of the hardware items listed may be attached to other parts.

5