Coleman 4010002738 manual To Turn Off, To Store, Gap. If the lantern is wet due to rain

To Light continued

NOTE: If lantern does not light,
	1/8"
repeat above step. If the lan-
tern does not light after several	(3 mm)
attempts, check for a spark while
clicking the valve. If no spark is
present, check the electrode gap.
The gap should be about 1/8"
(3 mm). Bend flat electrode to set
gap. If the lantern is wet due to rain,
high humidity, etc., the valve may
not spark. Use lighting procedure
for match light version lanterns.
■■Brightness may be adjusted
with fuel valve.
■■The lantern may be carried by
the handle.

To Turn Off

■■Turn fuel valve off.

8

To Store

■■Make sure lantern is cool.

■■Move lantern away from flame (including pilot lights) and other ignition sources.

■■Remove propane cylinder from lantern.

■■Replace protective cap on propane cylinder.

■■Lantern can be placed in base for secure storage.

DANGER

•EXPLOSION - FIRE HAZARD

•Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources or where temperatures exceed 120 °F (49 °C).

•The cylinder must be disconnected when the lantern is in storage.