JVC RX-5060B manual Operating Video Components, CD changer, DVD player, Set TV/CATV selector to TV

Page 32

Operating JVC’s Audio/Video Components

CD changer

After pressing CD-DISC, you can perform the following operations on a CD changer:

3:

Start playing.

4:

Return to the beginning of the current (or previous)

 

track.

¢:

Skip to the beginning of the next track.

7:

Stop playing.

8:

Pause playing. To resume, press 3.

1 – 6, 7/P:

Select the number of a disc installed in a CD

 

changer.

After pressing CD, you can perform the following operations on a CD changer:

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Example:

•Selecting disc number 4, track number 12, and starting playback.

1 Press CD-DISC, then press 4.

2 Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301), you can do the following operations

using the number buttons after pressing CD.

1Select a disc number.

2Then select a track number (always enter two digits).

3Press 3 to start playback.

Examples:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and starting playback.

Press 1, 0, 5, then 1, 2, then 3.

Operating Video Components

IMPORTANT:

To operate JVC’s video components using the supplied remote control:

•Some JVC’s VCRs can accept two types of the control signals— remote code “A” and “B.” Before using this remote control, make sure that the remote control code of the target VCR is set to code “A.”

•When using the remote control, aim the remote control directly at the remote sensor on each component, not on the receiver.

•Refer also to the manuals supplied with your components.

VCR

You can always perform the following operations:

STANDBY/ON

VCR: Turn on or off the VCR.

VCR CH +/–:

Change the TV channels on the VCR.

After pressing VCR, you can perform the following operations on the VCR:

3:

Start playing.

REW:

Rewind the tape.

FF:Fast-forward the tape.

7:

Stop playing, recording, rewind and fast forward.

8:

Pause playing and recording. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

DVD player

You can always perform the following operation:

STANDBY/ON DVD:

Turn on or off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter.

¢: Skip to the beginning of the next chapter.

7: Stop playing.

8: Pause playing. To resume, press 3.

Note:

It is required to press each button within 4 seconds in the above procedure.

After pressing DVD, these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.

2

46

MENU

7/P 8

ENTER

10

TV

Set TV/CATV selector to “TV.”

You can always perform the following operations:

STANDBY/ON

TV/CATV: Turn on or off the TV.

TV/CATV CH +/–:

Change the channels.

TV VOLUME +/–:

Adjust the volume.

TV/VIDEO:

Set the input mode (either TV or VIDEO).

After pressing TV SOUND, you can perform the following operations on the TV:

1 – 9, 0, 100+ (+10): Select the channels.

RETURN (10): Alternate between the previously selected channel and the current channel.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RX-5060B Mises en garde, précautions et indications diverses For U.S.ATable of Contents Display Parts IdentificationFront Panel Remote Control Rear PanelBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Putting Batteries in the Remote ControlAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers Connecting Audio/Video Components Connecting the subwooferPlacing speakers Analog ConnectionsVideo component connections VCRDigital Connections Connecting the Power CordPlug the power cord into an AC outlet Daily Operational Procedure Selecting the Source to Play Turning On the PowerTo turn off the power into standby mode Basic OperationsAdjusting the Volume When analog input is selected Always lights upSound Picture from a video component such as the VCR or DVDPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones When Dolby Digital or DTS Surround is selected To select the analog input modeChanging the Display Brightness Press DimmerUsing the Sleep Timer Basic adjustment auto memoryMuting the Sound Recording a sourceTuning in to Stations Manually Using Preset TuningTo erase a stored preset station Receiving Radio BroadcastsSelecting the FM Reception Mode To tune in a preset stationBasic Settings Before you start, rememberSize of the connected speakers Room Speaker Distance Output SizeBasic Setting Items Ex. When setting Virtual Surround Back to Vrtl SB onSetting the Bass Sounds Setting the SpeakersSetting the Speaker Distance Selecting the Main or Sub Channel Select the playback sounds channelSetting for Effective Surround Operations Setting the Digital Input TerminalsSelect Vrtl SB on to activate Virtual Surround Back Set the components connected to the digital terminalsEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Adjusting the Equalization Patterns Adjusting the Speaker Output LevelsUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesDolby Digital*1 Dolby Digital 5.1CHWhat is Linear PCM? What is Dual Mono?DTS Digital Surround DTS 96/24To cancel the Surround mode Activating the Surround ModesAuto Surround Function Activating the Surround Modes ManuallyUsing the DSP Modes Reproducing the Sound FieldIntroducing the DSP Modes Digital Acoustic Processor DAP modesTo cancel the DSP mode Multi-channel digital signalsActivating the DSP Modes All Channel StereoCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverAutomatic Source Selection Synchronized RecordingOperating JVC’s Audio/Video Components Operating Audio ComponentsOperating Video Components CD changerDVD player Set TV/CATV selector to TVManufacturer Codes If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand Operating Other Manufacturers’ Video EquipmentTroubleshooting Problem Possible Cause SolutionSpecifications Output PowerAmplifier AudioGeneral FM tuner IHFAM tuner Page Page AUDIO/VIDEO Control Receiver Recepteur DE Commande AUDIO/VIDEO Mises en garde, précautions et indications diverses Basic Settings English4 5 6 7 8 9 0 = ~ Enter Level DVD Do not insert any metal object into the receiver Speakersleft Getting Started VCR Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Following symptoms may occur Attenuating the Input SignalWhen playing software encoded with Dolby Digital or DTS, OFFCanceled Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Effective Surround Operations Current setting or level for the selected item appears on DisplayAdjusting Sound Using the Surround Modes Using the Surround Modes Auto SURROUND* Plii Game Using the DSP Modes Activating the DSP Modes Compu Link Remote Control System Operating JVC’s Audio/Video Components Operating JVC’s Audio/Video Components Operating Other Manufacturers’ Video Equipment Operating Other Manufacturers’ Video Equipment Troubleshooting Front channels EN, FR RX-5062S If in Doubt Consult a Competent Electrician RX-5062S Information for Users on Disposal of Old Equipment Above ALLTroubleshooting Specifications Basic Settings 4 5 6 7 8 9 0 = ~ ! @ Display Mode Connecting the FM and AM MW Antennas Remote Control Batteries AM MW Loop Antenna FM AntennaAM MW antenna connections Antenna suppliedGetting Started VCR Connecting the Power Cord TAPE/CDR DVD AUX FM/AM Basic Operations For details about the digital signal formats, see pages 26 Attenuating the Input Signal Muting the Sound Receiving Radio Broadcasts Selecting the FM Reception Mode Enhanced Other Networks Receiving FM Stations with Radio Data SystemTo show the Radio Data System information To search for a program using the PTY codes Searching for a Program by PTY CodesTo continue searching after the first stop Description of the PTY codes News NewsWhen the current source is other than FM Switching to a Program of Your Choice AutomaticallyWhen the current source is FM LS/RS These items can be set using Quick Speaker Setup see Setting the Speakers Selecting the Main or Sub Channel Setting for Effective Surround Operations 30 is in use Adjustable when Pro Logic II Music is in use Adjusting the Equalization Patterns Using the Surround Modes DTS*2 Using the Surround Modes Using the DSP Modes Using the DSP Modes Operating JVC’s Audio/Video Components TV CH + Troubleshooting AM MW tuner RX-5062S
Top Page Image Contents