JVC RX-5060B manual Operating Other Manufacturers’ Video Equipment

Page 74

English

Operating Other Manufacturers’ Video Equipment

To change the transmittable signals for	To change the transmittable signals for
operating another manufacturer’s VCR	operating another manufacturer’s DVD player

1Press and hold STANDBY/ON VCR.

2Press VCR.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer	Codes
JVC	01*, 02, 03
Emerson	10, 22
Gold Star	11
Hitachi	04
Mitsubishi	12
NEC	21
Panasonic	07, 13
Philips	09
RCA	05, 06
Samsung	20
Sanyo	17, 18, 19
Sony	14, 15, 16
Zenith	08

* “01” is the initial setting.

4 Release STANDBY/ON VCR.

Now you can perform the following operations on the VCR:

STANDBY/ON	VCR: Turn on and off the VCR.
VCR CH +/–:	Change the TV channels on the
	VCR.

After pressing VCR, you can perform the following operations on the VCR:

1Press and hold STANDBY/ON DVD.

2Press DVD.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer	Codes
JVC	01*
Panasonic	02
Philips	04
Pioneer	03
Sony	05
Toshiba	06
Yamaha	07

* “01” is the initial setting.

4 Release STANDBY/ON DVD.

Now you can perform the following operations on the DVD player:

STANDBY/ON DVD: Turn on and off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter (or fast reverse for some models).

¢: Skip to the beginning of the next chapter (or fast forward for some models).

7: Stop playing.

8: Pause playing. To resume, press 3.

3:	Start playing.
REW:	Rewind the tape.

FF:Fast-forward the tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

5 Try to operate your VCR by pressing

STANDBY/ON VCR.

After pressing DVD, these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to

the instructions supplied with the discs or the DVD player.

2

46

MENU

7/P 8

ENTER

10

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

5 Try to operate your DVD player by pressing

STANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

32

Image 74

Contents RX-5060B Mises en garde, précautions et indications diverses For U.S.ATable of Contents Display Parts IdentificationFront Panel Remote Control Rear PanelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Putting Batteries in the Remote ControlAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers Placing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsVideo component connections VCRDigital Connections Connecting the Power CordPlug the power cord into an AC outlet To turn off the power into standby mode Daily Operational Procedure Selecting the Source to PlayTurning On the Power Basic OperationsSound Adjusting the VolumeWhen analog input is selected Always lights up Picture from a video component such as the VCR or DVDPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Changing the Display Brightness When Dolby Digital or DTS Surround is selectedTo select the analog input mode Press DimmerMuting the Sound Using the Sleep TimerBasic adjustment auto memory Recording a sourceTo erase a stored preset station Tuning in to Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsSelecting the FM Reception Mode To tune in a preset stationSize of the connected speakers Basic SettingsBefore you start, remember Room Speaker Distance Output SizeBasic Setting Items Ex. When setting Virtual Surround Back to Vrtl SB onSetting the Bass Sounds Setting the SpeakersSetting the Speaker Distance Selecting the Main or Sub Channel Select the playback sounds channelSelect Vrtl SB on to activate Virtual Surround Back Setting for Effective Surround OperationsSetting the Digital Input Terminals Set the components connected to the digital terminalsEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Adjusting the Equalization Patterns Adjusting the Speaker Output LevelsDolby Digital*1 Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital 5.1CHDTS Digital Surround What is Linear PCM?What is Dual Mono? DTS 96/24Auto Surround Function To cancel the Surround modeActivating the Surround Modes Activating the Surround Modes ManuallyIntroducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesActivating the DSP Modes To cancel the DSP modeMulti-channel digital signals All Channel StereoAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingOperating JVC’s Audio/Video Components Operating Audio ComponentsDVD player Operating Video ComponentsCD changer Set TV/CATV selector to TVManufacturer Codes If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand Operating Other Manufacturers’ Video EquipmentTroubleshooting Problem Possible Cause SolutionAmplifier SpecificationsOutput Power AudioGeneral FM tuner IHFAM tuner Page Page AUDIO/VIDEO Control Receiver Recepteur DE Commande AUDIO/VIDEO Mises en garde, précautions et indications diverses Basic Settings English4 5 6 7 8 9 0 = ~ Enter Level DVD Do not insert any metal object into the receiver Speakersleft Getting Started VCR Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Following symptoms may occur Attenuating the Input SignalWhen playing software encoded with Dolby Digital or DTS, OFFCanceled Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Effective Surround Operations Current setting or level for the selected item appears on DisplayAdjusting Sound Using the Surround Modes Using the Surround Modes Auto SURROUND* Plii Game Using the DSP Modes Activating the DSP Modes Compu Link Remote Control System Operating JVC’s Audio/Video Components Operating JVC’s Audio/Video Components Operating Other Manufacturers’ Video Equipment Operating Other Manufacturers’ Video Equipment Troubleshooting Front channels EN, FR RX-5062S If in Doubt Consult a Competent Electrician RX-5062S Information for Users on Disposal of Old Equipment Above ALLTroubleshooting Specifications Basic Settings 4 5 6 7 8 9 0 = ~ ! @ Display Mode Connecting the FM and AM MW Antennas Remote Control Batteries AM MW Loop Antenna FM AntennaAM MW antenna connections Antenna suppliedGetting Started VCR Connecting the Power Cord TAPE/CDR DVD AUX FM/AM Basic Operations For details about the digital signal formats, see pages 26 Attenuating the Input Signal Muting the Sound Receiving Radio Broadcasts Selecting the FM Reception Mode Enhanced Other Networks Receiving FM Stations with Radio Data SystemTo show the Radio Data System information To continue searching after the first stop To search for a program using the PTY codesSearching for a Program by PTY Codes Description of the PTY codes News NewsWhen the current source is other than FM Switching to a Program of Your Choice AutomaticallyWhen the current source is FM LS/RS These items can be set using Quick Speaker Setup see Setting the Speakers Selecting the Main or Sub Channel Setting for Effective Surround Operations 30 is in use Adjustable when Pro Logic II Music is in use Adjusting the Equalization Patterns Using the Surround Modes DTS*2 Using the Surround Modes Using the DSP Modes Using the DSP Modes Operating JVC’s Audio/Video Components TV CH + Troubleshooting AM MW tuner RX-5062S