Basic Operations
Speaker and signal indicators on the display | Selecting different sources for picture and | ||||||||||
By checking the following indicators, you can easily confirm which | sound |
|
|
|
|
|
|
| |||
speakers you are activating and which signals are coming into this | While watching pictures from a video source, you can listen to | ||||||||||
receiver. |
| sound of an audio source. |
|
|
|
|
| ||||
|
| • Once you have selected a video source, pictures of the selected | |||||||||
Speaker indicators | Signal indicators |
|
| source are sent to the TV until you select another video source. | |||||||
|
| Press one of the audio source selection buttons while viewing the | |||||||||
|
| picture from a video component such as the VCR or DVD | |||||||||
|
| player, etc. |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| TAPE/CDR | CD | DVD AUX |
|
|
|
|
|
|
|
|
|
|
|
|
SB | SB |
|
| CD | TAPE/CDR | FM | AM |
| FM/AM | TV SOUND | VCR |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| ||
|
|
| SOURCE NAME |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
What speaker indicators light depends on the speaker setting (for details, see “Setting the Speakers” on page 21).
•The frames of “L,” “C,” “R,” “LS,” and “RS” light up, when the corresponding speakers are set to “LARGE” or “SMALL.” Sounds come out of the speakers whose speaker indicators is lit on the display.
•The 
indicator lights up when the subwoofer is activated (see pages 11 and 21).
The signal indicators light up to show the incoming signals. L: • When digital input is selected: Lights up when the left
channel signal comes in.
•When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the right
channel signal comes in.
•When analog input is selected: Always lights up.
C: Lights up when the center channel signal comes in.
LFE: Lights up when the LFE channel signal comes in.
LS: Lights up when the left surround channel signal comes in.
RS: Lights up when the right surround channel signal comes in.
S: Lights up when the monaural surround channel signal comes in.
SB: Lights up when the surround back channel signal comes in.
How to understand the speaker and signal indicator illumination
Ex. No sound comes out of the center speaker and surround speakers though center channel and surround channel signals are coming into this receiver.
On the front panel | On the remote control |
|
Adjusting the Volume
On the front panel:
To increase the volume, turn MASTER VOLUME clockwise. To decrease the volume, turn it counterclockwise.
On the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME
CAUTION:
Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/ or ruin your speakers.
Note:
The volume level can be adjusted within the range of “0” (minimum) to
“50” (maximum).
10