Star Trac 7070, 7090, 7060, 7080 manual Install the Pedals

5. Install the Pedals

NOTE: The pedal shafts are marked “R” and “L”. Trying to install the pedals on the wrong side may damage the pedal and the crank arm take caution to attach the pedals to the correct side of the bike.

Install the pedals on the pedal cranks using a 15mm open-end wrench and tighten securely.

Turn the left pedal spindle counterclockwise when

Step 5

threading into the left crank arm; turn the right pedal spindle clockwise when threading into the right crank arm.

You have now completed the assembly of your SPINNER® NXT.

!Attention! Crank bolt must be re-torqued after the first 10 hours of use. Refer to Preventive Maintenance section page 27.