JVC LVT0953-001B manual Additional Information, Connecting the Center speaker, Before connecting

Page 7

Connecting the Center speaker

•To connect the center speaker, use the same type of speaker cord (6 m; tagged with “FRONT SPEAKER”) as used for connecting the front speakers.

•Each speaker cord has its name tag attached to one end. Attach the end without the name tag to the speaker terminal.

Insert the speaker cord into the speaker terminal.

1Press and hold the clamp.

2Insert the exposed core of the speaker cord fully into the terminal.

• Connect the cord with the black stripe to the ·

terminal.

3Release your finger.

1 2 3

Additional Information

Connecting the speaker system to the amplifier

Before connecting—

•Turn off the power to the amplifier before connecting the speaker system; otherwise, the speakers may be damaged.

•The impedance of each speaker is 8 Ω. Before connecting them to your amplifier, check the speaker impedance range of your amplifier. If the impedance of this speaker is out of the speaker impedance range indicated on the amplifier, you cannot connect this system to the amplifier.

•The maximum power handling capacity of the SX-XD33 is 100 W. Excessive input will result in abnormal noise and possible damage.

•Be sure to turn down the volume level to prevent unwanted noise before performing following operations:

–Turning on or off other components,

–Operating the amplifier,

–Tuning FM stations,

–Fast-forwarding a tape,

–Continuously reproducing high frequency oscillation or high pitch electronic sounds.

•When using a microphone, do not aim it at the speakers or use it near the speakers; otherwise, the howling which occurs may damage the speakers.

•Before replacing the cartridge, always turn off the power to the turntable; otherwise, the clicking noise may damage the speakers.

English

The cord with the black stripe.

Typical connection method to an amplifier

Connect the speakers to a “SPEAKER” terminal of the amplifier with the speaker cords by referring to the diagram below.

•Make sure to match the polarity (ª and ·) when connecting the speaker cords.

•The diagram below is an example of a typical connection method.

Front right

Front left

speaker

speaker

 

Center speaker

Make sure to match the polarity (ª and ·); otherwise, the sound will lose the surround effect.

After connecting, check that the exposed cores are fully inserted into the terminal.

(Approx. 6 m)

 

(Approx. 6 m)

(Approx. 6 m)

Rear right

RIGHT

LEFT

RIGHT

LEFT

Rear left

FRONT

 

CENTER

REAR

SPEAKERS

 

SPEAKER

SPEAKERS

speaker

 

 

 

 

speaker

CAUTION: SPEAKER IMPEDANCE

8 16

Speaker terminals

on the amplifier

(Approx. 15 m)

(Approx. 15 m)

– 7 –

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Home Cinema DD Speaker System To improve the sound field Precautions for installationPrecautions for Daily Use To maintain the appearance of the speakersAbout the OFC cord Checking the supplied AccessoriesWhen connecting the speaker cords When using other speaker cordsAssembling the satellite speakers AssemblyJoin the leg to the stand Insert the speaker cord into the speaker terminal Connect the speaker cord to the speaker terminal of the legEnglish Attach the terminal cover to the legJoin the speaker section and the leg For disassemblyInsert the speaker cord into the speaker terminal Connecting the Center speakerBefore connecting Additional InformationGeneral layout of speakers SpecificationVorsichtsmaßnahmen für den Gebrauch DeutschZusammenbau Fortsetzung auf der nächsten Seite Bringen Sie die Anschlussabdeckung am Fuß anVerbinden Sie Lautsprecherabschnitt und Fuß Zusammenbau FortsetzungZerlegung Anschließen des Mittenlautsprechers Zusätzliche InformationenTechnische Daten Zusätzliche Informationen FortsetzungAllgemeine Anordnung der Lautsprecher Précautions pour une utilisation quotidienne Vérification des accessoires fournisAisç Montage Remettez en place le couvercle des prises sur le pied FrançaisSuite à la page suivante Réunissez la section de l’enceinte et le pied Montage suitePour démonter les enceintes Connexion de l’enceinte centrale Informations complémentairesInsérez le cordon d’enceinte dans les prises d’enceinte Spécifications Informations complémentaires suiteDisposition générale des enceintes Voorzorgen voor dagelijks gebruik Controleren van de bijgeleverde accessoiresNederlands Monteren van de satelliet-luidsprekers MonterenBevestig de poot aan de standaard Vervolg op volgende bladzijde Bevestig de aansluiting-afdekking aan de pootBevestig het luidsprekergedeelte en de poot Monteren vervolgDemonteren Aansluiten van de middenluidspreker Extra informatieSteek het luidsprekersnoer in de luidsprekeraansluiting Specificaties Extra informatie vervolgAlgemene opstelling voor de luidsprekers Español Precauciones durante el uso diarioMontaje de los altavoces satélite Una la pata al soporte MontajeIlustración Fije la tapa de terminales a la pataIntroduzca las puntas de los cables de altavoz en la Pata, y extráigalos de la manera indicada en laUna la sección del altavoz y la pata Montaje continuaciónPara el desarmado Método de conexión típica a un amplificador Información adicionalConexión del altavoz central Introduzca el cable de altavoz en el terminal de altavozEspecificaciones Información adicional continuaciónDisposición general de los altavoces Precauzioni per l’uso quotidiano Verifica degli accessori in dotazioneItaliano Collegamenti Continua alla pagina successiva Posizionare il coperchio del terminale sullo steloCollegare l’unità diffusore allo stelo Collegamenti continuaPer smontare le parti Collegamento tipico all’amplificatore Ulteriori informazioniCollegamento del diffusore centrale Inserire il cavo per il diffusore nel terminaleDati caratteristici Ulteriori informazioni continuaDisposizione generale dei diffusori Kontrollera medföljande tillbehör Åtgärder vid dagligt brukSätt ihop foten och ställningen MonteringMontering av satellithögtalarna Fästandet av fot och ställning Ta bort fotens kabelskoskyddSätt fast kabelskoskyddet på foten Koppla högtalarkabeln till fotens högtalarkabelskoSvenska Sätt ihop högtalarenheten och foten Montering fortsättningDemontering Koppling av högtalarsystemet till förstärkaren Ytterligare informationInkoppling av mitthögtalaren För in högtalarkabeln i högtalarkabelsko⋅ 282 mm djup Mm djup Vikt cirka Kg st 85 kg Ytterligare information fortsättningSpecifikation Allmän uppställning av högtalareKontrol af det medfølgende tilbehør Forholdsregler for hverdagsbrugDansk Samling af satellithøjttalerne Sæt benet på standeren SamlingSæt terminaldækslet fast på benet Forbind højttalerledningen til benets højttalerterminalFortsættes på næste side Højttalerterminalen inde i benet Samling fortsatFor at skille ad igen Tilslutning af højttalersystemet til forstærkeren Yderligere oplysningerTilslutning af centerhøjttaleren Skub højttalerledningen ind i højttalerterminalenGenerelt højttalerlayout Yderligere oplysninger fortsatSuomi Varoituksia, huomautuksia ym Huomautuksia asennuksestaVarotoimet päivittäisessä käytössä Mukana toimitettujen lisävarusteiden tarkistusKokoaminen Jatkuu seuraavalla sivulla Liitä kaiutinjohto jalustassa olevaan liitäntäänKiinnitä suojakansi jalustaan Pujota kaiutinjohto aluslaatan läpi kuvatulla tavallaIrrota kaiutinosa jalustasta Irrota jalusta aluslaatasta Kokoaminen jatkoaKiinnitä kaiutinosa jalustaan PurkaminenKaiuttimien kytkentä vahvistimeen LisätietojaKeskikaiuttimen liittäminen Yhdistä kaiutinjohto kaiutinliitäntäänTekniset tiedot Lisätietoja jatkoaKaiuttimien sijoittelu Victor Company of JAPAN, Limited

LVT0953-001B specifications

The JVC LVT0953-001B is an innovative audio component that stands out for its blend of functionality, aesthetic design, and advanced technology. This particular model is engineered to enhance your multimedia experience, making it an excellent addition to any home entertainment setup.

One of the key features of the JVC LVT0953-001B is its superior sound quality. It employs advanced audio technologies that deliver crystal-clear sound, robust bass, and well-defined highs. Whether you're listening to music, watching movies, or playing video games, this device ensures an immersive sound experience that captures every nuance and detail.

The JVC LVT0953-001B is equipped with versatile connectivity options, allowing it to integrate seamlessly with various devices. It supports multiple input formats, including AUX, USB, and Bluetooth, which enables you to connect smartphones, tablets, and other devices effortlessly. This versatility makes it easy to enjoy your favorite content from a variety of sources without any hassle.

Another notable characteristic of the LVT0953-001B is its sleek and modern design. Its compact form factor ensures that it fits easily into any living space, whether it is on a shelf, table, or as part of a larger entertainment center. The aesthetic component not only enhances the visual appeal of your room but also complements other electronics.

Moreover, the JVC LVT0953-001B features user-friendly controls, allowing for easy operation. A well-designed interface provides quick access to key functions, making it simple for users of all ages to navigate. This model also offers the advantage of remote control functionality, giving users the freedom to manage their audio experience from a distance.

Durability is also a critical aspect of the JVC LVT0953-001B. Constructed with high-quality materials, it is designed to withstand the rigors of daily use while maintaining optimal performance. This resilience makes it a reliable choice for long-term use.

In summary, the JVC LVT0953-001B combines outstanding sound quality, versatile connectivity, modern design, and user-friendly features. It is a well-rounded audio solution that brings a superior listening experience to the forefront, making it a valuable addition to any multimedia environment.
Top Page Image Contents