HOW to USE Custom Programs

Current Segment

1Insert the key fully into the console.

See GETTING STARTED on page 10.

display will flash to alert you, and three tones will
sound. When the first segment is completed,	all
speed settings will move one column to the left	.
The speed setting for the second segment will
then be shown in the flashing Current Segment
column and the treadmill will automatically adjust
to the speed and incline settings for the second

2 Select one of the custom programs.

When the key is in- serted, the manual mode will be selected. To select one of the custom programs, press the Select Program but- ton repeatedly until the

Learn 1 or Learn 2 indicator lights.

Learn Indicator

segment.
The program will continue until the speed setting
for the last segment is shown in the Current
Segment column and no time remains in the
Time/Laps display. The walking belt will then slow
to a stop.
If desired, you can redefine to the program while
using the program.	To change the speed or in-
cline setting during the current segment,		sim-

When a custom program is selected, the program display will show a simplified profile of the pro- gram. The Time/Laps display will show how long

the program will last. Note: If only three columns of indicators are lit in the program display, see HOW TO CREATE A CUSTOM

PROGRAM on page 14.

Press the Start button or the Speed + button to

3 start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.

Each program is divided into several one-minute segments. The Time/Laps display shows both the time remaining in the program and the time re- maining in the current segment. One speed set- ting and one incline setting are programmed for each segment. The

speed setting for the first segment will be

shown in the flashing Current Segment col- umn of the program dis- play. (The incline set-

tings are not shown in

the program display.) The speed settings for the next five segments will be shown in the five columns to the right.

When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a tone will sound. In addition, if the speed and/or incline of the treadmill is about to change, the Speed/Pace display and/or the Distance/Incline

ply press the Speed or Incline buttons. When the
current segment is completed, the new setting will be
saved in memory.		To increase the length of the
program,	first wait until the program is completed.
Then, press the Start button and program speed and
incline settings for as many additional segments as
desired. (	Note: While you are adding segments to
the program, the speed settings in the program
display will not move to the left. Instead, each time
a segment is completed,			the flashing Current
Segment column will move one column to the
right. If the Current Segment column reaches the
right side of the program display, when the current
segment is completed			all columns of indicators in
the program display will move three columns to
the left.)	When you have added as many seg-
ments as desired, press the Stop button twice.				To
decrease the length of the program,			press the
Stop button twice at any time before the program is
completed.

To stop the program temporarily, press the Stop button. All displays will pause and the Time/Laps display will begin to flash. To restart the program, press the Start button or the Speed + button. To end the program, press the Stop button, remove

the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 11.

5 Measure your heart rate, if desired.

See step 6 on page 12.

6 When the program has ended, remove the key.

See step 6 on page 13.