Image IMTL11997 Problem The walking belt slows when walked on, Power Cord, Shifted to the left

Page 24

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to

4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c.If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

PROBLEM: The walking belt is off-center or slips when walked on

 

SOLUTION:

a. If the walking belt is off-center, first remove the key and

 

UNPLUG THE POWER CORD

 

. If the walking belt has

 

shifted to the left,

use the allen wrench to turn the left

 

rear roller bolt clockwise 1/2 of a turn;

if the walking belt

 

has shifted to the right,

turn the bolt counterclockwise

 

1/2 of a turn. Be careful not to overtighten the walking

 

belt. Plug in the power cord, insert the key and run the

 

treadmill for a few minutes. Repeat until the walking belt is

 

centered.

 

 

a

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn.

When the walking belt is correctly tightened, you should

be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in

the console, press one of the incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents To Avoid DELAYS, Please Call Direct to OUR Toll QUESTIONS?Customer HOT Line Table of Contents Important Precautions Use the treadmill only as described in this manualWear appropriate exercise clothes when Same circuit. Do not use an extension cordInspect and tighten all parts of the treadmill regularly Never insert or drop any object into any openingUsing the treadmill Before YOU BeginLeft Side Right SideAssembly Assembly requires two peopleMake sure that Extension Legs 102 remain in the Uprights Do not tighten the Bolts yet HOW to Plug in the Power Cord Performant LubeUse only a single-outlet surge suppressor that is Surge suppressor must be electrically ratedFeatures of the Console VideoGetting Started HOW to USE the Manual Mode HOW to USE Preset Programs Walking belt and remove the keyMeasure your heart rate, if desired StandAll Gram displayManually HOW to Create Custom Programs Select one of the custom programsPress the Start button or the Speed + button To the leftHOW to USE Custom Programs Cline setting during the current segmentWhen the program has ended, remove the key Follow your progress with the displaysHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes HOW to Connect Your Home Stereo Cable Wire removed from Line OUT jackHOW to Connect Your Computer Headphones/SpeakersHOW to Connect Your VCR ProgramsNext settings of the CD or video program Start button or the SpeedConsole See the instructions near the bottomHOW to USE Programs Directly from OUR WEB Site Information MODE/DEMO Mode Information mode is selected, press SpeedImportant The Heart Rate/Calories display Buttons on the console will not operate If a d ap PearsHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETROUBLE-SHOOTING Problem The power turns off during useSolution Power cordProblem The walking belt slows when walked on Power CordShifted to the left CenteredConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. IMTL11997 Qty Description Key No. QtyOrdering Replacement Parts Limited Warranty What is COVERED-The entire ImageBy warranty Part No R0202ADRAWING-Model R0202A
Top Page Image Contents