Image IMTL11997 user manual Assembly requires two people

Page 6

ASSEMBLY

Assembly requires two people.

Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Assembly requires the included allen wrench

and your own phillips screwdriver

and wire cutters

.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the

1

 

 

Uprights (69) until the treadmill is in the position shown.

 

 

 

 

 

See the inset drawing. Insert one of the Extension Legs

 

 

 

(102) into the treadmill as shown. Make sure that the

 

 

69

Extension Leg is turned so the Base Pad (99) is on the

 

 

 

bottom. Note: It may be helpful to tip the Uprights (69)

 

 

 

forward as you insert the Extension Leg.

 

 

 

 

Insert the other Extension Leg (not shown) in the same

 

 

69

way.

 

 

 

 

 

 

 

 

102

 

 

 

 

99

2. Press the Lock Knob Sleeve (70) into the left Upright (69).

2

 

 

 

 

 

 

Make sure that the Lock Pin Collar (72) and the Spring

 

 

 

(71) are on the Lock Pin (74). Insert the Lock Pin into the

 

 

69

Lock Knob Sleeve (70) and the left Upright (69). Next,

 

 

 

 

 

press the Lock Knob Spacer (80) onto the left Upright.

68

 

 

Tighten the Lock Knob (68) onto the Lock Pin.

 

 

 

 

70

 

 

 

 

 

 

 

80

71

 

 

 

72

 

 

 

 

 

 

 

 

74

3. With the help of a second person, carefully tip the

3

 

 

Uprights (69) down as shown.

Make sure that the

 

 

 

 

 

Extension Legs (102) remain in the Uprights.

 

 

 

Attach each Extension Leg (102) with two Screws (111)

 

 

99

as shown.

 

 

 

 

 

 

 

With the help of a second person, carefully tip the

 

 

Frame

 

 

 

Uprights (69) back to the vertical position.

 

 

69

 

 

69

 

Note: One replacement Base Pad (99) may be included.

 

111

 

 

Use the Base Pad to replace any Base Pad that becomes

 

 

102

worn.

 

99

 

111

 

 

 

102

 

 

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents To Avoid DELAYS, Please Call Direct to OUR Toll QUESTIONS?Customer HOT Line Table of Contents Wear appropriate exercise clothes when Important PrecautionsUse the treadmill only as described in this manual Same circuit. Do not use an extension cordInspect and tighten all parts of the treadmill regularly Never insert or drop any object into any openingLeft Side Using the treadmillBefore YOU Begin Right SideAssembly Assembly requires two peopleMake sure that Extension Legs 102 remain in the Uprights Do not tighten the Bolts yet Use only a single-outlet surge suppressor that is HOW to Plug in the Power CordPerformant Lube Surge suppressor must be electrically ratedFeatures of the Console VideoGetting Started HOW to USE the Manual Mode Measure your heart rate, if desired HOW to USE Preset ProgramsWalking belt and remove the key StandAll Gram displayManually Press the Start button or the Speed + button HOW to Create Custom ProgramsSelect one of the custom programs To the leftWhen the program has ended, remove the key HOW to USE Custom ProgramsCline setting during the current segment Follow your progress with the displaysHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes HOW to Connect Your Computer HOW to Connect Your Home StereoCable Wire removed from Line OUT jack Headphones/SpeakersHOW to Connect Your VCR ProgramsConsole Next settings of the CD or video programStart button or the Speed See the instructions near the bottomHOW to USE Programs Directly from OUR WEB Site Important The Heart Rate/Calories display Information MODE/DEMO ModeInformation mode is selected, press Speed Buttons on the console will not operate If a d ap PearsHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USESolution TROUBLE-SHOOTINGProblem The power turns off during use Power cordShifted to the left Problem The walking belt slows when walked onPower Cord CenteredWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. IMTL11997 Qty Description Key No. QtyOrdering Replacement Parts By warranty Limited WarrantyWhat is COVERED-The entire Image Part No R0202ADRAWING-Model R0202A
Top Page Image Contents