NordicTrack NCTL11992 manual Unplug the Power Cord

Page 27

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7 to 10 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tight- ened.

b

7-10 cm

Rear Roller Adjustment Bolts

c. If the walking belt still slows, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center

SOLUTION:

a.

If the walking belt has shifted to the left,

first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn the left rear roller adjustment bolt clock-

 

 

 

wise, and the right bolt counterclockwise, 1/4 of a turn each.

 

 

 

Be careful not to overtighten the walking belt. Plug in the

 

 

 

power cord, insert the key and run the treadmill for a few

 

 

 

minutes. Repeat until the walking belt is centered.

 

 

b.

If the walking belt has shifted to the right,

first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn the left rear roller adjustment bolt coun-

 

 

 

terclockwise, and the right bolt clockwise, 1/4 of a turn

 

 

 

each. Be careful not to overtighten the walking belt. Plug

 

 

 

in the power cord, insert the key and run the treadmill for

 

 

 

a few minutes. Repeat until the walking belt is centered.

 

a

b

PROBLEM: The walking belt slips when walked on

 

SOLUTION:

a. If the walking belt slips when walked on, first remove the

 

 

key and

UNPLUG THE POWER CORD

. Using the allen

wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the

key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model No. NCTL11992 Serial No Serial Number DecalTo operate this product, call Limited Warranty Table of ContentsImportant Precautions From your CD player or VCR when you are not using them Right Side Using the treadmillBefore YOU Begin Left SideAssembly Assembly requires two peopleMake sure that the Extension Legs Remain in the Uprights Not tighten the Bolts yet Operation and Adjustment Features of the Console 1Attach the clip to the waistband of your clothes Plug in the power cordEnter your weight Getting StartedDisplay Displays Insert the key fully into the consoleTraining Zone dis Time displayHOW to USE Preset Programs Manually When the program has ended, remove the keySound, LeftHOW to Create Custom Programs Indicator isRemove the key HOW to USE Custom Programs GramAfter the segment is Select the fitness test program HOW to USE the Fitness Test ProgramSor to use the fitness test program see Put on the chest pulse sensorPulse-driven program see 1Put on the chest pulse sensorSelect the pulse-driven program Decrease IncreaseTreadmill will always HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Audio 5mm Cable Adapter HOW to Connect Your Home StereoHOW to Connect Your Computer Plug the adapter into the Line OUT jack on your stereoPrograms HOW to Connect Your VCRTon or the Speed Next settings of the CD or video programWhen the program is completed, remove Key Tings of the CD or video programReturn to the treadmill and stand on the foot HOW to USE Programs Directly from OUR Internet SiteConnection Follow the on-line instructions to start ProgramOptional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Solution TROUBLE-SHOOTINGUnplug the Power Cord Power CordExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Key No. Qty Lift FrameOptional Chest Pulse Key No. Qty Description EXP2000 treadmill Ordering Replacement PartsR0102A Exploded DRAWING-Model No. NCTL11992No. NCTL11992
Top Page Image Contents