NordicTrack NTL29105.0 user manual Information MODE/DEMO Mode

Page 23

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.

To select the information mode, hold down the STOP button while inserting the key into the console. When the information mode is selected, the main display will show the following information:

The left side of the main display will show the total number of hours that the treadmill has been used.

The center of the main display will show the total distance that the walking belt has moved.

The right side of the main dis- play will show an E for English miles or an M for metric kilometers. Press the SPEED + button to change the unit of measurement.

IMPORTANT: Make sure that there is not a letter D in

the main display. If a D ap- pears, the console is in the “demo” mode. This mode is

intended to be used only

when a treadmill is displayed in a store. When the con- sole is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will au- tomatically light in a preset sequence, although the buttons on the console will not operate. If a D appears in the display when the information mode is se- lected, press the SPEED – button so the display is blank.

To exit the information mode, remove the key from the console.

23

Image 23
Contents Call TOLL-FREE QUESTIONS?Model No. NTL29105.0 Serial No Table of Contents Important Precautions Underside Console Before YOU Begin Make sure that the Wire Harness is fully connected AssemblyFirmly tighten the eight Handrail Bolts HOW to Move the TreadmillChest Pulse Sensor Troubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor Care and MaintenanceTreadmill Operation HOW to Connect the Power CordFeatures of the Console Getting Started Plug in the power cordMove the on/off switch to the on position Enter your weightPace/Time-When HOW to USE the Manual ModeChange the incline of the treadmill as desired Measure your heart rate if desired Pulse/% Max-When you are using the handPress the Start button to start the program HOW to USE Preset ProgramsSelect one of the six preset programs Select one of the three pulse-driven programs HOW to USE PULSE-DRIVEN ProgramsFollow your progress with the main display Whenkey. the program is completed, removePress the Start button to start the program Your must enter your age to use the fitness HOW to USE the Fitness Test ProgramSelect the fitness test program Enter your ageAudio Cable Headphones HOW to Connect Your Home Stereo HOW to Connect Your Portable StereoAudio Adapter Cable HOW to Connect Your ComputerHOW to Connect Your VCR Change before the personal trainer describes the change Insert the key fully into the consolePressVCR. the Play button on your CD player or Return to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Information MODE/DEMO Mode Symptom the Walking Belt Slows When Walked on TroubleshootingSymptom the Power does not Turn on Symptom the Power Turns OFF During USESymptom the Chest Pulse Sensor does not Function Properly Symptom the Walking Belt is OFF-CENTERRemove the key and unplug Power cord. Remove Symptom the Surface of the Walking Platform is DamagedExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesDescription Qty R0106BDescription Ordering Replacement PartsExploded DRAWING-Model No. NTL29105.0 120 113 104 112 111 109 106 119 108 121 105 83 82 116 118 Limited Warranty