NordicTrack NTL07007.1 user manual HOW to USE the Sound System

Page 20

The workout is de-

signed to last for nine minutes. When the workout ends, the walking belt will slow to

a stop and your fitness

age will appear in the Fitness Age Calculator dis- play.

5.Monitor your progress with the display. See step 5 on page 15.

6.When you are finished exercising, remove the key from the console.

See step 7 on page 16.

HOW TO USE THE SOUND SYSTEM

This product has been designed specifically to work with iPod and has been certified by the developer to meet Apple performance standards. To play music or audio books through the console’s speaker, you must connect your iPod, CD player, or personal audio player to the console through the audio jack or through the Integrated Universal Dock for iPod.

To use the audio wire, locate the audio wire and plug it into the audio jack near the speaker. Then, plug the audio wire into a jack on your iPod, CD player, or per- sonal audio player. Make sure that the audio wire is fully inserted.

To use the Integrated Universal Dock for iPod, you need an iFIT Universal iPod Connector. Plug one end into the Integrated Universal Dock for iPod near the speaker and the other end into your iPod. Make sure that the iFIT Universal iPod Connector is fully plugged in. To purchase an iFIT Universal iPod Connector, please call the telephone number on the front cover of this manual.

Next, press the Play button on your iPod, CD player, or personal audio player. Adjust the volume on your iPod, CD player, or personal audio player or press the Volume increase and decrease buttons on the con- sole.

If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.

20

Image 20
Contents Call TOLL-FREE QUESTIONS?Model No. NTL07007.1 Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Hardware may be includedMake sure that the power cord is unplugged See the inset drawing. Tie the wire tieDo not fully fold the Frame yet Nut the Wheel must turn freely. DiscardBe careful not to pinch the Upright Wire Fully tighten the Bolts yetSee assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts Pull on the sleeve to make sure that it is locked into place Make sure that no wires are pinched PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Start the walking belt and adjust the speedTime/Incline dis Monitor your progress with the displays Matrix-When youChange the incline of the treadmill as desired Measure your heart rate if desired Press the Start button to start the workout HOW to USE a Preset WorkoutSelect a preset workout Press the Start Workout button to start the workout HOW to USE the Custom Workout CenterSelect the Custom Workout Center HOW to USE the Fitness Test Workout Put on the chest pulse sensorSelect the fitness test workout Press the Start Fitness Test button to start the workoutHOW to USE the Sound System Monitor your progress with the displays HOW to USE AN Ifit CardInsert an iFIT card and select a workout Optional Chest Pulse Sensor Information ModeHOW to Adjust the Cushioning System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useView Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0108A Key No. Qty DescriptionQty Exploded Drawing A-Model No. NTL07007.1 Exploded Drawing B-Model No. NTL07007.1 Exploded Drawing C-Model No. NTL07007.1 Exploded Drawing D-Model No. NTL07007.1 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty