![](/images/new-backgrounds/1134197/13419729x1.webp)
If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons next to the Start but- ton. Each time you press a button, the speed set- ting will change by 0.1 mph; if you hold down a but- ton, the speed setting will change in increments of
0.5mph. If you press one of the numbered speed buttons, the walking belt will gradually increase or decrease in speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered speed buttons.
5.Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the incline buttons numbered 0 to 12. Each time you press one of the buttons, the incline will gradu- ally increase or decrease until it reaches the se- lected incline setting.
6.Select a display mode and monitor your progress with the display and the intensity level bar.
As you walk or run on the treadmill, the display can show the following workout information:
•The elapsed time.
•The distance that you have walked or run.
•The speed of the walking belt.
•The incline level of the treadmill.
•The approximate number of calories you have burned.
•Your walking or running pace, in minutes per mile or minutes per kilometer.
•A visual equalizer.
•Your heart rate. Note: Your heart rate can be dis- played only while you use the handgrip pulse sensor or the chest pulse sensor.
•In addition, the display can show a “workout his-
•The display can also show an animation of a run- ner on a road. As you increase or decrease the speed setting, the runner will speed up or slow down.
When the manual mode is selected, the console of- fers eight display modes. The display mode that you select will determine which workout information is shown. For example, the first display mode shows only the elapsed time and the distance that you have walked or run. Press the Display button repeatedly to select the desired display mode.
Regardless of which display mode you select, the speed or incline setting will appear in the display for a few sec-
onds each time you change the setting. In addition, your heart
rate will appear in the display each time you use the handgrip pulse sensor or put on the chest pulse sensor. Note: If you select the display mode shown above, your heart rate will be shown in place of the approximate exercise pace.
15