NordicTrack NTL15007.0 user manual Top, Problem The walking belt slows when walked on

Page 26

Next, locate the Reed Switch (20) and the Magnet

Top

 

(12) on the left side of the Pulley (11). Turn the Pulley

 

View

 

until the Magnet is aligned with the Reed Switch.

 

 

 

Make sure that the gap between the Magnet and

29

1/8 in.

the Reed Switch is about 1/8 in. (3 mm). If neces-

sary, loosen the indicated 3/4" Tek Screw (29), move

20

11

the Reed Switch slightly, and then retighten the

12

Screw. Then, reattach the hood. Place the treadmill in

 

 

 

the storage position (see HOW TO FOLD THE

 

 

TREADMILL FOR STORAGE on page 23). Next, re-

 

 

place the two 3/4" Screws (not shown). Lower the

 

 

treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 24). Run the treadmill for

a few minutes to check for a correct speed reading.

 

 

PROBLEM: The walking belt slows when walked on

 

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few min- utes. Repeat until the walking belt is properly tight- ened.

b

3–4 in.

 

Rear Roller Bolts

c. If the walking belt still slows when walked on, please see the front cover of this manual.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walk- ing belt has shifted to the right, turn the left rear roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Call TOLL-FREE QUESTIONS?Model No. NTL15007.0 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Assembly Not shown. Do not tighten the Bolts yet See the inset drawing. Tie the wire tieFul not to pinch the Upright Wire Harness Page Page Chest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor TroubleshootingPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the Console Follow the steps below to personalize the console settings HOW to Turn on the PowerHOW to Personalize Console Settings Select the manual mode HOW to USE the Manual ModePersonalize console settings if desired Start the walking belt and adjust the speedChange the incline of the treadmill as desired When you fold the treadmill to the storage posi When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Measure your heart rate if desiredPress the Start button to start the workout HOW to USE a Preset WorkoutSelect a preset workout See on HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout HOW to USE AN Ifit Card Insert an iFIT card and select a workoutHOW to USE the Stereo Sound System HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1107A Qty DescriptionQty Exploded ModelModel No Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty

NTL15007.0 specifications

The NordicTrack NTL15007.0 is a versatile and innovative piece of fitness equipment designed to provide an engaging workout experience. This treadmill is tailored for those seeking an effective cardiovascular workout, combining cutting-edge technology with user-friendly features.

One of the standout features of the NTL15007.0 is its advanced iFit integration. This technology offers users access to a vast library of on-demand workouts led by professional trainers. Users can explore various workout routines that mimic real-world terrains, allowing for a more immersive experience. The iFit technology also enables users to track their progress over time, set achievable fitness goals, and receive personalized coaching based on their performance metrics.

The treadmill boasts an impressive 10-inch smart touchscreen display, which not only enhances the visual appeal but also provides easy navigation through workout programs and iFit content. The bright and responsive screen ensures that users can quickly adjust settings, track their speed, distance, and calories burned during workouts.

Furthermore, the NTL15007.0 is equipped with a powerful motor designed for durability and performance. With a maximum speed of 12 miles per hour, users can engage in various training intensities, whether interval training or long-distance running. An incline feature that ranges from 0 to 12% simulates uphill paths, adding to the workout's effectiveness and variety.

To enhance user comfort, the NTL15007.0 features FlexSelect cushioning, which allows users to adjust the firmness of the treadmill deck. This cushioning system reduces impact on joints and provides a more comfortable running surface, making it suitable for both beginners and experienced runners.

The robust design of the NordicTrack NTL15007.0 ensures stability and safety during workouts. Additionally, the built-in speakers allow users to enjoy their favorite music or podcasts while exercising, creating a motivating atmosphere.

In summary, the NordicTrack NTL15007.0 is a well-rounded treadmill that combines innovative technology, versatile workout options, and user-centric features for a comprehensive fitness experience. With its combination of iFit integration, adjustable cushioning, and powerful performance capabilities, this treadmill is an excellent addition for anyone serious about their fitness journey. Whether you’re running, walking, or engaging in interval training, the NTL15007.0 caters to a wide range of fitness enthusiasts, helping them achieve their health goals effectively.
Top Page Image Contents