NordicTrack NTL14010.0 warranty

Page 30

Lower the treadmill (see HOW TO LOWER THE

TREADMILL FOR USE on page 28). Remove the

71

three #8 x 3/4" Screws (1). Carefully pivot the Motor Hood (71) off.

Locate the Reed Switch (52) and the Magnet (50) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 ram). If neces- sary, loosen the #8 x 3/4" Tek Screw (13), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown) with

the five #8 x 3/4" Screws (not shown) and run the treadmill for a few minutes to check for a correct

speed reading.

PROBLEM: The incline of the treadmill does not change correctly

Top

View

1/8 in..

52-

-_ 50

13 _

----49

SOLUTION: a. Recalibrate the incline system (see step 3 on page 25).

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 14.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and run the

Idler Roller Bolts

treadmill for a few minutes. Repeat until the walking belt is properly tightened.

c. If the walking belt still slows when walked on, see the front cover of this manual.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Customer Care QUESTIONS?Model No. NTL14010.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4p.m. MTContents IMPORTANT Precautions Dang ER a waysunplugthepower Before YOU Begin Assembly Make Page Tiet!I Console Page This step Page HOW to USE the Chest Pulse Sensor HOW to PUT on the Chest Pulse SensorOperation and Adjustment HOW to Plug in the Power CordFeatures of the Console ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMonitor your progress Measure your heart rate if desired HOW to USE a SET-A-GOAL Workout Turn on the fan if desiredPage Workout. The actual number of calories that HOW to USE the Ifit Live Mode Ifit Live FCC Information Select the iFit Live modeHOW to USE the Settings Mode Log in to your iFit Live account HOW to USE the Maintenance Mode Perform a network test HOW to USE the Stereo Sound System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Page Page Exercise Intensity Workout GuidelinesSuggested Stretches Quadriceps StretchInner Thigh Stretch Part List DescriptionQty 111 112 Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyICON Health & Fitness, Inc., 1500 S W., Logan, UT

NTL14010.0 specifications

The NordicTrack NTL14010.0, also known as the Commercial 14.9 elliptical, is a cutting-edge fitness machine designed to provide a comprehensive workout experience while ensuring comfort and efficiency. This elliptical trainer is part of NordicTrack's commitment to delivering high-quality exercise equipment that caters to a wide range of fitness enthusiasts, from beginners to seasoned athletes.

One of the standout features of the NTL14010.0 is its 14-inch Smart HD touchscreen. This vibrant display not only showcases your workout metrics but also provides access to an extensive library of iFit workouts. iFit technology offers users interactive training sessions led by professional trainers, allowing for an immersive experience that can transport users to scenic locations around the world. The touchscreen is user-friendly, making navigation through various workout programs and settings effortless.

The NTL14010.0 incorporates adjustable SMR Silent Magnetic Resistance, allowing users to customize their workout intensity seamlessly. With 26 resistance levels, it caters to individuals at every fitness level, challenging users as they progress. Additionally, the machine features incline capabilities that can be adjusted up to 20 degrees to further diversify workout routines and target different muscle groups.

Ergonomics are a priority with this elliptical. The oversized, cushioned pedals provide comfort during extended workout sessions, reducing impact on the joints. The use of a 20-inch stride length ensures a natural motion that mimics walking or running while targeting the legs and glutes effectively. Another notable characteristic is the built-in sound system, which allows users to listen to their favorite music or follow along with online classes, enhancing the overall workout experience.

Durability is a key factor in the NTL14010.0's design, featuring a sturdy frame that supports a maximum user weight of 350 pounds. The easy-to-move design and built-in transport wheels also make it convenient to store when not in use.

Overall, the NordicTrack NTL14010.0 Commercial 14.9 elliptical trainer stands out for its combination of advanced technology, adjustable features, and thoughtful design, making it an ideal choice for anyone looking to enhance their fitness journey from the comfort of home. With its range of workout options and engaging capabilities, it promises to keep users motivated and supported as they pursue their fitness goals.
Top Page Image Contents