Assembly
9.If Safety Latch Assembly will not secure cor- rectly, turn the four Screws
NOTE: DO NOT REMOVE SCREWS FROM LATCH HOUSING.
Next, slide the Safety Latch Housing up or down to align the Safety Latch with center of hole locat- ed on the left handlebar. Tighten the four Screws to secure the assembly in place.
LATCH HOUSING |
SCREWS |
10.Install the Left and Right Fenders to Base using Philip Screw ST4.2X16 as shown in Figure 8.
Figure 7: Safety Latch Adjustment
RIGHT FENDER |
BASE |
PHILIP SCREW |
ST4.2x16 |
LEFT FENDER |
Figure 8: Left and Right Fender Installation
11. Assembly is complete. Move Treadmill to permanent location. See Moving Instructions. Before operating the treadmill, adjust Levelers so that Base of treadmill does not wobble. See Figure 9.
Figure 9: Adjust Levelers
Congratulations!
You have completed the assembly of your new Ironman INSPIRE Treadmill!
9