Horizon Fitness 4.3E, 3.3E, 2.3E manual S E M B LY Step

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

12

A S S E M B LY STEP 5 (CONTINUED)
UPPER HANDLEBAR
NOTCH
PRE-ATTACHED
SET SCREWS
TAB	FOR 4.3E ONLY
	CONSOLE MAST
	UPPPER HANDLEBAR
LOWER HANDLEBAR
	CONSOLE WIRE
	UPPPER HANDLEBAR WIRE

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A)Slide UPPER HANDLEBAR onto LOWER HANDLEBAR and align NOTCH with TAB making sure handlebars are joined together completely. Secure UPPER HANDLEBAR to LOWER HANDLEBAR using PRE-ATTACHED SET SCREWS.

B)Repeat on other side.

C)(For 4.3E only) Attach WIRE from UPPER HANDLEBAR to WIRE from CONSOLE MAST.

UPPPER HANDLEBAR

HANDLEBAR COVERS

D)Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLEBARS. Note the position ot the snap tabs on the covers before snapping into position. (On 4.3E, tuck wires inside of HANDLEBAR COVERS, CAREFUL not to pinch any wires).

E)Repeat on other side.