Reebok RCTL07809.0 Again. if the Connectors are not CON, Power, Careful not to pinch the wires

9.Remove the tie from the bracket on the Right Handrail (105).

Have a second person hold the Right Handrail (105) near the Right Upright (79).

Insert the Upright Wire (86) into the bottom of the Right Handrail (105) and pull it out of the hole in the top of the Right Handrail.

Attach the Right Handrail (105) to the Right Upright (79) with three 5/16" x 3/4" Bolts (4) and three 5/16" Star Washers (9); do not fully tighten the Bolts yet. Be careful not to pinch the Upright Wire (86).

9

Hole		86
4	Tie
	9	105
4
79

10. Remove the tie from the bracket on the Left	10
Handrail (101).
Attach the Left Handrail (101) to the Left Upright	101
(77) with three 5/16" x 3/4" Bolts (4) and three	Tie
5/16" Star Washers (9); do not fully tighten
the Bolts yet.	4

				9	4
			77
11. Have a second person hold the console assem-	11	Console
bly near the Right Upright (79).
Connect the Upright Wire (86) to the console		Assembly
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE			Console
POWER.
Then, remove the wire tie from the Upright Wire	105	86	Wire		Console
(86). Insert the connectors and the excess wire
into the Right Handrail (105).			Wire Tie		Wire
Set the console assembly on the Right Handrail
(105) and the Left Handrail (not shown). Be					86
careful not to pinch the wires.	79
	11