Reebok RCTL07809.0 Make sure that the power cord is unplugged, Do not fully fold the Frame yet

1. Make sure that the power cord is unplugged.	1				B	A
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the				86		Hole
Frame (53) so that the treadmill is more stable;
do not fully fold the Frame yet.						88
Remove and discard the two indicated bolts (A)							2
and the shipping bracket (B).
Cut the shipping tie securing the Upright Wire
(86) to the Base (60). Locate a tie in the indi-
cated hole in the Base, and use the tie to pull
the Upright Wire out of the hole.	53	89	88	2
Attach two Base Feet (88) to the Base (60) in the
locations shown with two #8 x 1" Tek Screws (2)
and two Base Foot Spacers (89). Then, attach						88
two Base Feet (88) with two #8 x 1" Tek Screws							2
(2).
					8988	2
2. Attach a Wheel (90) to the Base (60) with a 3/8"	2
x 2" Bolt (3) and a 3/8" Locknut (11). Do not
overtighten the Locknut; the Wheel must
turn freely.				60
See the inset drawing. Cut the plastic tie near		3
the Upright Wire (86).
			11	90
						86Cut
	7