10.Locate the chest pulse kit. Hold the Chest
Pulse Receiver (53) so the antenna is ori- ented as shown. Attach the Chest Pulse Receiver to the Pulse Receiver Cover (70) with the #3 x 1/4" Screw (84) included in the chest pulse kit.
11.Connect the wire on the Chest Pulse Receiver (not shown) to the wire extending from the con- sole assembly. Reattach the Pulse Receiver Cover (70) to the console assembly with the two #8 x 3/4" Screws (4). Make sure that no wires are pinched. Discard the other wires included with the receiver.
10 | 84 | |
| ||
Antenna | 70 | |
53 | ||
| ||
11 |
| |
Console | Wires | |
Assembly | 70 | |
| 4 |
12.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24). To protect the floor or carpet from damage, place a mat under the treadmill.
10