HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
Plug in the power cord (see |
|
|
|
|
|
|
|
|
|
|
|
| |
page 11). Next, locate the |
| Reset |
|
|
|
|
reset/off circuit breaker on |
|
|
|
|
| |
|
|
|
|
| ||
the treadmill frame near the |
| Position |
|
|
|
|
|
|
|
|
| ||
power cord. Make sure that |
|
|
|
|
|
|
|
|
|
|
|
| |
the circuit breaker is in the |
|
|
|
|
|
|
|
|
|
|
|
| |
“reset” position. |
|
|
|
|
|
|
IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and switch the reset/off circuit breaker to the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see HOW TO PERSONALIZE CONSOLE SETTINGS at the right to turn off the demo mode.
Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing on page 12), and slide the clip securely onto the waistband of your clothes. Then, insert the key into the console. After a moment, the displays will light. IMPORTANT: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip.
HOW TO PERSONALIZE CONSOLE SETTINGS
The console features a settings mode that allows you to view the total time and total distance the walking belt has moved, select a system of measurement for the console, turn on and turn off the demo mode, ad- just the volume and contrast settings of the console, and select an audio equalizer setting.
Follow the steps below to personalize the console settings.
To select the settings mode, first remove the key from the console. Then, hold down the Stop button while reinserting the key into the console.
When the settings mode is selected, the top of the dis- play will show the total number of hours that the tread- mill has been used and the total number of miles or kilometers that the walking belt has moved.
The display will show the word ENGLISH or METRIC to indicate which system of measurement is selected. To change the system of measurement, press the Speed increase button.
The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the but- tons will not function. Press the Speed decrease button to select OFF (to turn off the demo mode), VISUAL EQ (to display a visual equalizer), ROAD (to display an ani- mation of a runner on a road), or PROGRAMS (to dis- play previews of various workouts).
To adjust the volume, first highlight volume level by pressing the Display button repeatedly. Next, press the Performance or Custom button to select a volume set- ting.
To adjust the contrast of the display, first highlight con- trast level by pressing the Display button repeatedly. Next, press the Performance or Custom button to se- lect a contrast setting.
You can also select an equalizer setting to optimize the sound of your personal music. Choose among DE- FAULT, CLASSIC, COUNTRY, TECHNO, or ROCK. To select an equalizer setting, first highlight the equal- izer setting by pressing the Display button repeatedly. Next, press the Performance or Custom button to se- lect an equalizer setting.
To exit the settings mode at any time, remove the key
13from the console.