Reebok Fitness RBTL15908.0 manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.

#8 x 3/4"

3/8" x 1 1/2" Bolt (64)–6

 

Screw (4)–4

 

3/8" Star

3/8" x 3 3/4" Bolt

 

Washer (90)–10

(72)–4

 

1. Make sure that the power cord is unplugged.

1

 

With the help of a second person, raise the front

 

 

of the treadmill and insert the crossbar on the

 

 

Base (83) into the cutout in the cardboard stand

 

 

as shown. Have the second person hold the

 

 

treadmill to prevent it from moving forward

 

 

or backward until assembly step 2 is com-

 

 

pleted.WARNING: Serious injury

 

 

may occur if the treadmill moves for-

 

 

ward or backward and falls off the card-

 

 

board stand. A second person must

 

 

hold the treadmill until assembly step 2

 

 

is completed to prevent the treadmill

83

Cardboard

from moving, tipping, or falling.

 

 

Stand

 

6

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. RBTL15908.0 Serial No On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Make sure that the power cord is unpluggedFrom moving, tipping, or falling Page Page Console Assembly Locate the chest pulse kit. Hold the Chest Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to Personalize Console SettingsFollow the steps below to personalize the console settings HOW to USE the Manual Mode Start the walking belt and adjust the speedInsert the key into the console Measure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Workout HOW to Create a Custom Workout HOW to USE a Custom Workout HOW to USE the Sound System HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Important The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopUnplug the Power CORD. If the walking belt Key and Unplug the Power CORD. UsingIng belt has shifted to the right, turn the left idler Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. RBTL15908.0 Key No. Qty DescriptionQty 3355 101 Exploded Drawing B-Model No. RBTL15908.0 R1008A Exploded Drawing C-Model No. RBTL15908.0 R1008A 104 102 111 112 110 109 103 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents