Reebok Fitness RBTL15908.0 manual HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. To raise the frame, bend your legs, keep your back straight, and lift with your legs. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheelsNever. Carefully move the treadmill to the desired location. move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

Frame

Frame

Latch Knob

Handrails

Wheel

20

Image 20
Contents QUESTIONS? Model No. RBTL15908.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin From moving, tipping, or falling AssemblyMake sure that the power cord is unplugged Page Page Console Assembly Locate the chest pulse kit. Hold the Chest PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleFollow the steps below to personalize the console settings HOW to Turn on the PowerHOW to Personalize Console Settings Insert the key into the console HOW to USE the Manual ModeStart the walking belt and adjust the speed Measure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Workout HOW to Create a Custom Workout HOW to USE a Custom Workout HOW to USE the Sound System HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useImportant The treadmill is not Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopIng belt has shifted to the right, turn the left idler Unplug the Power CORD. If the walking beltKey and Unplug the Power CORD. Using Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. RBTL15908.0 Key No. Qty DescriptionQty 3355 101 Exploded Drawing B-Model No. RBTL15908.0 R1008A Exploded Drawing C-Model No. RBTL15908.0 R1008A 104 102 111 112 110 109 103 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty