7.Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright Sleeve with two #8 x 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to the console assembly as described above.
8.With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward.
Firmly tighten the four 3/8" x 3 3/4" Bolts (72). With the help of a second person, lower the treadmill off the cardboard stand.
9.Remove the indicated #8 x 3/4" Screws (4) from the Pulse Receiver Cover (70) on the back of the console assembly.
7 |
|
|
Console |
| 4 |
Assembly |
| |
|
| 96 |
|
| 4 |
8 |
|
|
|
| 72 |
72 | 83 | Cardboard |
| ||
| Stand | |
9 |
|
|
Console
Assembly 70
4
9