Life Fitness 9000HR operation manual Removing and Replacing the WAX BAG

Page 11

REMOVING AND REPLACING THE WAX BAG

The wax lubrication system is a standard feature on the 9000HR model and international 8500 model. Treadmills with waxers are equipped to monitor wax levels automatically. On the 9000HR, when the the wax bag is six-percent full, the console displays “NOTIFY MAINTENANCE -- WAXER NEEDS REFILL”. When the bag is empty, the treadmill shuts down, and the console displays, “NOTIFY MAINTENANCE -- WAXER EMPTY”. On a waxer-equipped 8500 model, when the wax bag is six-percent full, the DATA DISPLAY windows show “Err9”. When the wax bag is empty, the treadmill shuts down and the DATA DISPLAY windows show, “Err10”.

The wax bag is installed underneath the motor pan of the treadmill. To make replacing the bag as easy as possible, use the UP LEVEL ARROW key to elevate the treadmill to the 15 percent incline.

Before starting the procedure, turn the power off (“I”) at the ON/OFF switch, and unplug the unit from the electrical outlet.

Open the wax tray: Pull out the three push rivets (A) that fasten the front edge of the wax tray (B) to the bottom of the motor pan (C). If necessary, use a flat-edge screw driver to pry off the rivets. The rivets are reusable. Set down the front edge of the wax tray with the wax bag on top of it.

Note: The rear edge of the wax tray is attached to the motor pan during factory assembly.

Detach the old wax bag: Remove the motor cover. Engage (1) the wax bag hose clamp (D) to pre- vent any wax residue from seeping out of the bag. Then, gently work the wax bag hose off of the barbed nozzle on the wax pump inlet hose located inside the motor compartment. Open (2) the hose clamp, and slide it off. Discard the old wax bag.

Attach the hose clamp to the new wax bag: Slide the hose clamp (D) over the end of the new wax bag outlet hose (E). Position the clamp approximately three inches from the end of the hose and clamp it (1) onto the wax bag hose to prevent spillage.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Treadmill International Offices Corporate HeadquartersPage Table of Contents 9000HR 8500 Getting Started Important Safety InstructionsSave These Instructions for Future Reference Consignes DE Sécurité Importantes Point DE DépartConservez CES Instructions Pour Usage Ultérieur Setup Removing and Replacing the WAX BAG HOW to Position and Stabilize the Life Fitness Treadmill Power Switch Centering the Belt Fitness Networking and Entertainment 9000HR only Display Console Overview Display ConsoleDisplay Console Descriptions Page Reading Rack Accessory TraysEmergency Stop System Heart Rate Zone Training Exercise WHY Heart Rate Zone Training EXERCISE?Heart Rate Monitoring Polar Telemetry Heart Rate Monitoring Chest Strap Workout Overviews Using the WorkoutsWorkouts To stop a workout before the end of the dura Level Workout Descriptions COOL-DOWN9000HR onlyRandom 9000HR only Cardio 9000HR only Entering and Using the MANAGER’S Configuration MANAGER’S ConfigurationConfiguration Settings 9000HR SettingsSettings Preventive Maintenance Tips Service and Technical DataMonthly BI-ANNUALLY Annually Preventive Maintenance ScheduleTroubleshooting the Polar Heart Rate Chest Strap Troubleshooting the Lifepulse System SensorsHOW to Adjust and Tension the Striding Belt Removing the Accessory TraysTracking Centering a Striding Belt Tensioning AN Existing Striding Belt HOW to Obtain Product Service Life Fitness 9000HR Treadmill Specifications SpecificationsLife Fitness 8500 Treadmill Specifications 10601 W. Belmont Ave Franklin Park, IL

9000HR specifications

The Life Fitness 9000HR is a revolutionary piece of fitness equipment designed to meet the demands of both commercial gyms and home fitness enthusiasts. This cardio machine combines advanced technology with robust construction to deliver an exceptional workout experience.

One of the standout features of the Life Fitness 9000HR is its ergonomically designed frame, which supports a natural running motion. The treadmill is equipped with a spacious running surface that offers ample room, allowing users of all sizes to train comfortably. With a maximum speed of 12 mph and multiple incline settings, individuals can customize their workout intensity to match their fitness goals.

The innovative FlexDeck shock absorption system is another critical characteristic of the 9000HR. This technology reduces the impact on joints by up to 30%, making it a safer option for users who may be prone to injuries. The FlexDeck feature allows for a more comfortable running experience, enabling users to engage in longer workouts without discomfort.

In terms of technology, the Life Fitness 9000HR is outfitted with a user-friendly console. The LCD screen provides clear, real-time feedback on key performance metrics such as speed, distance, time, and calories burned. Users can also track their heart rate through built-in sensors or by using a wireless heart rate monitor, ensuring they can maintain their desired training zone effectively.

Furthermore, the Life Fitness 9000HR offers a variety of pre-set workout programs, catering to different fitness levels and goals, from weight loss to endurance training. Its compatibility with Lifepulse heart rate monitoring allows for customized workouts based on user-defined heart rate zones, enhancing training effectiveness.

The durability of the Life Fitness 9000HR is another aspect worth highlighting. Built to withstand the rigors of frequent use, it features a heavy-duty frame that ensures stability during high-intensity workouts. Coupled with a high-quality motor and a long-lasting running belt, this treadmill is designed to provide years of reliable service.

In summary, the Life Fitness 9000HR is an exceptional treadmill that brings together advanced features, innovative technology, and durable construction. Whether for a commercial gym or home use, it delivers an outstanding workout experience that caters to various fitness levels, making it a top choice for fitness enthusiasts.
Top Page Image Contents