Life Fitness 9000HR specification

Position the wax bag under the frame: Place the wax bag (F) on top of the wax tray, so that the wax bag is directly underneath the treadmill motor pan (C), the wax bag flange is facing out toward the front of the treadmill, and the wax bag hose is near the hole (G) at the bottom of the motor pan through which the hose will be fed in the next step.

Connect the wax bag hose to the pump inlet hose: Cut off the end of the wax bag hose (E) one half-inch from the end. Feed the hose through the hole (G) at the bottom of the motor pan, and slide it onto the barbed nozzle on the wax pump inlet hose located inside the motor compart- ment. Be sure to fully seat the wax bag hose onto the inlet hose. Release (2) the hose clamp (D).

CAUTION: Failure to release the hose clamp greatly shortens belt life.

MISE EN GARDE : la bride de serrage doit être relâchée sous peine de réduire de façon importante la durée de vie du tapis.

Close the wax tray: Align two holes of the wax bag flange with the two holes along the front edge of the wax tray (B) and the two holes at the bottom of the treadmill motor pan (C). Attach the wax tray and wax bag (F) to the motor pan with two of the push-rivets (A), simply by pushing each rivet upward through both sets of aligned holes. Once each rivet is pushed through the holes as far as possible, its front tip flares open to keep the tray and wax bag fastened to the motor pan. Push a third push-rivet through the remaining aligned holes in the wax tray and the bottom of the treadmill motor pan.

Inform the system that a new wax bag has been installed: Access the Manager’s Configuration. For details, see Section 5.1, titled Entering and Using the Manager’s Configuration. On the 9000HR model, scroll to the Refill Waxer System configuration setting. Press ENTER. The MESSAGE CENTER displays “REPAIR LOGGED”. Press the CLEAR key three times to exit the Manager’s Configuration. On the 8500 model, select the Waxer System Installed configuration setting. Change the setting to “no” by pressing the SPEED DOWN ARROW key once. Then, change the setting to “yes” by pressing the SPEED UP ARROW key once. Press the STOP key once to exit the Manager’s Configuration.

HOW TO POSITION AND STABILIZE THE LIFE FITNESS® TREADMILL

Following all safety instructions in Section 1.1, move the
treadmill to the location in which it will be used. See
Section 7, titled Specifications, for the dimensions of the
footprint. Allow a distance of eight inches, or 21 centime-
ters, between the treadmill and other units on either side.
Allow a distance of six feet, or two meters, from the rear	A
of the treadmill to any object or surface.	A
After placing the unit where it will be used, check its sta-	B

bility. If there is even a slight rocking motion or the unit is not stable, determine which stabilizing leg is not resting on the floor. To adjust, loosen the JAM NUT (A), and turn the STABILIZING LEG (B) until the rocking motion ceases, and both stabilizing legs rest firmly on the floor. Retighten the JAM NUT.

NOTE: It is extremely important that the stabilizing leg be correctly adjusted for proper opera- tion. An unbalanced unit may cause striding belt misalignment.

9000HR specifications

The Life Fitness 9000HR is a revolutionary piece of fitness equipment designed to meet the demands of both commercial gyms and home fitness enthusiasts. This cardio machine combines advanced technology with robust construction to deliver an exceptional workout experience.

One of the standout features of the Life Fitness 9000HR is its ergonomically designed frame, which supports a natural running motion. The treadmill is equipped with a spacious running surface that offers ample room, allowing users of all sizes to train comfortably. With a maximum speed of 12 mph and multiple incline settings, individuals can customize their workout intensity to match their fitness goals.

The innovative FlexDeck shock absorption system is another critical characteristic of the 9000HR. This technology reduces the impact on joints by up to 30%, making it a safer option for users who may be prone to injuries. The FlexDeck feature allows for a more comfortable running experience, enabling users to engage in longer workouts without discomfort.

In terms of technology, the Life Fitness 9000HR is outfitted with a user-friendly console. The LCD screen provides clear, real-time feedback on key performance metrics such as speed, distance, time, and calories burned. Users can also track their heart rate through built-in sensors or by using a wireless heart rate monitor, ensuring they can maintain their desired training zone effectively.

Furthermore, the Life Fitness 9000HR offers a variety of pre-set workout programs, catering to different fitness levels and goals, from weight loss to endurance training. Its compatibility with Lifepulse heart rate monitoring allows for customized workouts based on user-defined heart rate zones, enhancing training effectiveness.

The durability of the Life Fitness 9000HR is another aspect worth highlighting. Built to withstand the rigors of frequent use, it features a heavy-duty frame that ensures stability during high-intensity workouts. Coupled with a high-quality motor and a long-lasting running belt, this treadmill is designed to provide years of reliable service.

In summary, the Life Fitness 9000HR is an exceptional treadmill that brings together advanced features, innovative technology, and durable construction. Whether for a commercial gym or home use, it delivers an outstanding workout experience that caters to various fitness levels, making it a top choice for fitness enthusiasts.