Gold's Gym GGTL07809.0 manual Console assembly. See the inset drawing

Page 10

8. Press the Left Handrail Cover (95) against the

 

8

 

console assembly. See the inset drawing.

 

Align the lip on the Left Handrail Cover with the

 

 

lip on the console assembly. Leave a small gap

 

 

between the Left Handrail Cover and the con-

 

 

sole assembly. Then, fully tighten the four #8 x

 

 

1/2" Screws (2) in the Left Handrail (94). Note:

 

 

The Screws are preattached.

 

 

Repeat this step with the Right Handrail

 

 

Cover (103).

 

 

Tighten two 1/4" x 1/2" Patch Bolts (3) into the

 

 

Handrails (94, 102) and the console assembly.

 

 

See step 7. Fully tighten the four #8 x 1/2"

 

 

Screws (2) and the two 3/8" x 3/4" Patch Bolts

 

 

(10).

 

 

 

 

 

2

2

3

102

103

 

 

 

 

 

2

95 2

3

94

Console

Lips

Assembly

 

9.Identify the Left Accessory Tray (82) and the Right Accessory Tray (101). Attach the Left Accessory Tray and the Right Accessory Tray to the console assembly with eight #8 x 1/2" Screws (2).

9

2

2

 

101

 

82

 

 

Console

 

Assembly

10

Image 10
Contents QUESTIONS? Model No. GGTL07809.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Completely assembled Make sure that the power cord is unpluggedNot fully fold the Frame until the treadmill is Tek Screws 4 do not overtighten the TekSee the inset drawing. Tie the wire tie Fully tighten the Patch Bolts yetPage Console assembly. See the inset drawing Repeat this step with the Right Handrail CoverUprights. Be careful not to pinch any wires Patch Bolts before tightening any of them104 Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to USE the Manual Mode HOW to Turn on the PowerInsert the key into the console Follow your progress with the displays. The matrix-When you Measure your heart rate if desired. Before using Turn on the fans if desiredSelect a preset workout HOW to USE a Preset WorkoutStart the walking belt HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout HOW to USE the Stereo Sound System Information ModeMake sure that the audio wire is fully plugged HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Important The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopProblem Solution Walking belt is off-center or slips when walked onWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. GGTL07809.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. GGTL07809.0 R0909A Exploded Drawing B-Model No. GGTL07809.0 R0909A Exploded Drawing C-Model No. GGTL07809.0 R0909A Exploded Drawing D-Model No. GGTL07809.0 R0909A Exploded Drawing E-Model No. GGTL07809.0 R0909A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT