Gold's Gym GGTL07809.0 manual 104

Page 12

12.Attach the Left Bottom Handrail Cover (96) and the Right Bottom Handrail Cover (104) to the console assembly with four #8 x 3/4" Screws

13.Raise the Frame (51) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (80) so that the large barrel and the Latch Knob (81) are oriented as shown.

Attach the Latch Bracket (90) and Storage Latch

(80)to the Base (83) with two 3/8" x 2" Bolts (6) and two 3/8" Nuts (12).

Attach the upper end of the Storage Latch (80) to the bracket on the Frame (51) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (12). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket.

Lower the Frame (51) (see HOW TO LOWER THE TREADMILL FOR USE on page 24).

12
96		Console
	1	Assembly
	1	104
		104
		1
13

	51
12		6
		80rge
81		Barrel
81		90
		90
	83	12	6
		12

12

Image 12

Contents QUESTIONS? Model No. GGTL07809.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Not fully fold the Frame until the treadmill isCompletely assembled Tek Screws 4 do not overtighten the TekSee the inset drawing. Tie the wire tie Fully tighten the Patch Bolts yetPage Console assembly. See the inset drawing Repeat this step with the Right Handrail CoverUprights. Be careful not to pinch any wires Patch Bolts before tightening any of them104 Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Follow your progress with the displays. The matrix-When you Measure your heart rate if desired. Before using Turn on the fans if desiredHOW to USE a Preset Workout Select a preset workoutStart the walking belt HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout Information Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useImportant The treadmill is not Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopProblem Solution Walking belt is off-center or slips when walked onExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. GGTL07809.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. GGTL07809.0 R0909A Exploded Drawing B-Model No. GGTL07809.0 R0909A Exploded Drawing C-Model No. GGTL07809.0 R0909A Exploded Drawing D-Model No. GGTL07809.0 R0909A Exploded Drawing E-Model No. GGTL07809.0 R0909A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT