Gold's Gym GGTL07809.0 manual Problem Solution, Walking belt is off-center or slips when walked on

Page 27

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on

a.If the walking belt is off-center, remove the key and

UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walk- ing belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

27

Image 27
Contents Model No. GGTL07809.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Assembly Tek Screws 4 do not overtighten the Tek Make sure that the power cord is unpluggedNot fully fold the Frame until the treadmill is Completely assembledFully tighten the Patch Bolts yet See the inset drawing. Tie the wire tiePage Repeat this step with the Right Handrail Cover Console assembly. See the inset drawingPatch Bolts before tightening any of them Uprights. Be careful not to pinch any wires104 Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Follow your progress with the displays. The matrix-When you Turn on the fans if desired Measure your heart rate if desired. Before usingHOW to USE a Preset Workout Select a preset workoutStart the walking belt Select a custom workout HOW to Create a Custom WorkoutHOW to USE a Custom Workout Information Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Important The treadmill is notTop Problem The walking belt slows when walked onWalking belt is off-center or slips when walked on Problem SolutionExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. GGTL07809.0Qty Exploded Drawing A-Model No. GGTL07809.0 R0909A Exploded Drawing B-Model No. GGTL07809.0 R0909A Exploded Drawing C-Model No. GGTL07809.0 R0909A Exploded Drawing D-Model No. GGTL07809.0 R0909A Exploded Drawing E-Model No. GGTL07809.0 R0909A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT