11.The Console (11) can be operated with four 1.5V “D” batteries (not included); alkaline batter- ies are recommended. IMPORTANT: If the ellipical exerciser has been exposed to cold temperatures, allow it to warm to room tem- perature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become damaged. Locate the two battery covers on the back of the Console. Press the tabs on the battery covers, and remove the bat- tery covers. Next, insert two batteries into each battery compartment; make sure that the bat- teries are oriented as shown by the symbols inside the battery compartments. Then, reat- tach the battery covers.
The Console (11) can also be operated with a regulated
11 |
| Battery |
| 11 | Cover |
|
| |
Battery |
|
|
Cover |
|
|
12.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
10