NordicTrack NTS5925.0 user manual Repeat this step with the Seat Frame

Page 11

14.Grease an M10 x 72mm Bolt (101). Attach the Leg Lever (8) to the Seat Frame (6) with the Bolt and an M10 Nylon Locknut (74). Do not over- tighten the Locknut; the Leg Lever must be able to pivot easily.

15.Slide two Small Foam Pads (25) onto the Leg Lever (8). Press two Endcaps (57) onto the Leg Lever.

Repeat this step with the Seat Frame (6).

16. Set the Seat Frame (6) on the Upright Base (2).

17.Attach the Curl Pad (29) to the Curl Post (9) with two M6 x 16mm Screws (72).

18.Make sure that all parts have been properly tightened before the resistance system is used.

	14
	Grease
	101
	8	74
	6	74
	15
	57
		6
	25	25
	8	25
	8
		57
	16
		6
		2
	17
	29
		9
		72

11

Image 11

Contents Call TOLL-FREE QUESTIONS?Model No. NTS5925.0 Serial No Table of Contents Page Important Precautions Left Side Before YOU BeginRight Side Repeat this step for the other side of the Base AssemblyMake Things Easier for Yourself Page Wide End 109 Repeat this step on the other side of the Top Frame Locknut the Dip Arm must be able to pivot easily Repeat this step with the Seat Frame Attaching the Accessories AdjustmentsAttaching the Pulley Housings Repeat with the other Housing CableAttaching the LEG Lever Adjusting the DIP ARMAttaching the Seat Frame Plugging in the Resistance System Attaching the Curl PADAttaching the Curl BAR Tightening the Mech Rope Resistance System ConsoleStaying Motivated Muscle ChartCooling Down Exercise Guidelines Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseMonday Part Identification Chart Key No. Qty Description PartR0306A Exploded Drawing A-Model No. NTS5925.0Exploded Drawing B-Model No. NTS5925.0 Limited Warranty Ordering Replacement Parts